Machining Tips!

First Machining Tip Added To The Jon Banquer Blog.

Jon Banquer San Diego, CA

formatting link

Reply to
jon_banquer
Loading thread data ...

Had you any real experience, you'd be using a vacuum chuck Jon. It's not possible to "squeeze" a part identically in a vice every time you change over.

Here is a machining "Tit" for ya'.

formatting link

Reply to
John R. Carroll

There is not reason to change out a vice and waste time mounting a vacuum chuck if you don't need to and a vise will work fine!

If anyone is interested I'd be happy to post pictures of our numerous vacuum-holding systems some of which are made by IBAG and many of which we make ourselves.

Jon Banquer San Diego, CA

formatting link

Reply to
jon_banquer

No kidding. You just clamp the chuck in your vice. You can even use that fancy and useless five axis stop you swear by to locate the thing. By doing so, you can make your chucks in advance if something custom is necessary. Otherwise, you buy standard stock and change out O-Rings. You can do that in sewconds if the guy generating the set up documents and code knows what he's doing. Ask him.

Why don't you let the quality of your work dictate the level of interest Jon? Put up something you have done yourself.

Reply to
John R. Carroll

First Machining Tip Added To The Jon Banquer Blog.

Jon Banquer San Diego, CA

formatting link

Reply to
jon_banquer

Yeah, That's what I thought.

Reply to
John R. Carroll

First Machining Tip Added To The Jon Banquer Blog.

Jon Banquer San Diego, CA

formatting link

Reply to
jon_banquer

Haha! Was that a test to see how quickly you could get Jon to revert back to broken record mode?

Reply to
Joe788

First Machining Tip Added To The Jon Banquer Blog.

Jon Banquer San Diego, CA

formatting link

Reply to
jon_banquer

Just wanted to see if I still "Owned" him. LOL

Reply to
John R. Carroll

First Machining Tip Added To The Jon Banquer Blog.

Jon Banquer San Diego, CA

formatting link

Reply to
jon_banquer

Jonnie working his new vlog....

formatting link

Reply to
Half-nutz

First Machining Tip Added To The Jon Banquer Blog.

Jon Banquer San Diego, CA

formatting link

Reply to
jon_banquer

Jon,

formatting link
(sept. 30, 1999)

formatting link
(oct. 4, 1999)

formatting link
You took someone else's original art, changed it a little and posted it to your blob as if you came up with the idea.

Clue: It's not plagiarism if you credit your sources!

Tom

Reply to
brewertr

[ I then mill a .030 deep step with a 1/2? 3 flute carbide end mill on both jaws. Next I insert a dovetail cutter and mill a dovetail in both the fixed and moveable jaw. I then come back and cut off the burr that the dovetail cutter leaves making sure to push the burr away from the edge of the dovetail. ]

You're saying you have machined an edge that will cut into and/or dimple the plastic blank?

[ Finally I use the end mill to create ?teeth? in the dovetail so that the plastic part can?t slide. ]

Why would the part slide when the dovetail you milled on the jaws are cutting into the plastic blank and putting downward pressure (hopefully) holding the part on the step you milled with the 1/2" end mill?

[ I frequently machine plastic parts and don?t wish to waste time machining two sides parallel so I can hold the material so the part won?t move while it?s being cut. ]

You have to mill off all the dimples you made in your plastic blank when you clamped it in your serrated jaws, so how are you are saving time in your operation?

[ The whole process can be done in less than ten minutes and results in a cheap way to hold and mill plastic parts. ]

Ten minutes, under what conditions?

When do you start & stop the clock?

Are you assuming you have the correct end mill 1/2" to mill step add deburr, 1/8" end mill to create "teeth", dovetail cutter and all holders already in the machine?

Are you including changing vise jaws to aluminum soft jaws?

You going to mill a stop into the soft jaws or do you have to install one?

[ It?s so fast I don?t even bother to save the aluminum soft jaws and instead just make them whenever I need them. ]

If this is as repetitive as you say, why not make a set or two of precision quick change hard jaws and do away with having to machine jaws over and over and over again?

Why are you cross posting machining tips to comp.cad.solidworks?

Tom

Reply to
brewertr

This honestly just sounds like something Jon would *like* to do, but never has.

I am on the edge of my seat waiting for the rest of the "tips."

Reply to
Joe788

First Machining Tip Added To The Jon Banquer Blog.

Jon Banquer San Diego, CA

formatting link

Reply to
jon_banquer

Yup, there you have it!! Good response there Jonnie,

If you have to do that routine, say 30 times a year, and you toss the jaws, as you say, AND, it only takes you 10 minutes MAX.

Then 30 X 10 =3D 300 minutes / 60 =3D 5 hours X 75.00 P/Hr =3D $375.00 Not counting cost of jaw blanks

I can buy several sets of jaw blanks from US Shop Tools and make the dovetail once for that kind of money.

It probably doesnt take 10 mins. more like 30 mins, unless as said earlier, all the tools just happen to be in holders, in the turret or carosel and the alum jaws just happen to be in the vise, and the part is the same size as the last one you made, and the tools in the turret were'nt used on 304 or 17-4 or O-1, in other words damaged or worn, in the REAL world 10 mins goes by real quick.

Have a nice Saturday, I gotta go make real parts that go real fast!

"D"

Reply to
reidmachine

Tom:

I have one of the original Mr. Clampys that was sent to me probably 8 years ago. It was a pretty neat idea, especially for fourth axis work. What holds your part are a couple of 1/2" dia. pins that stick up some .100, the dovetail self-centering clamps just hold the part down on the pins which resist the machining side loads. I used it a couple of times just to do it. I haven't used it in probably 7 years. To use the Mr. Clampy (or Technigrip as they changed the name), requires you to mill a couple of .500 holes in your stock as well as dovetail the edges. Plus if you have to drill through your part for some tapped holes or whatever you might hit the hardened pins or the Mr. Clampy body. I wonder if they're still in business.

Reply to
BottleBob

Bob, I'm pretty sure they are still around. It really is a fantastic idea for certain types of parts. I don't think the product will ever get huge though, because really, who wants to do a prep-op on every single part they make? You have to weigh the benefits of increased metal removal, against the cost of additional logistics, handling, and machining of the blanks.

For some parts though, the idea is almost unbeatable.

Reply to
Joe788

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.