Threaded View
Subject
- Posted on
RsK posted on November 6, 2006, 5:44 pm
I have to design an incremental optical disk position transducer system
with a resolution better than 6o and need to draw a suitable interface
circuit diagram showing how it could be connected to the PIC16F88
microcontroller.?
Tim Wescott posted on
Re: how it could be connected to the PIC16F88 microcontroller?
RsK wrote:
Homework?
--
Tim Wescott
Wescott Design Services
http://www.wescottdesign.com
Posting from Google? See http://cfaj.freeshell.org/google/
"Applied Control Theory for Embedded Systems" came out in April.
See details at http://www.wescottdesign.com/actfes/actfes.html
Site Timeline
- » I have to calculate the maximum shaft speed possible to maintain measurement reliability
- — Next thread in » Industrial Control Group
-
- » Modeling a column bottom level with bottom draw flow
- — Previous thread in » Industrial Control Group
-
- » Measurement validation for process signals
- — Newest thread in » Industrial Control Group
-
- » A new attraction : "Velo-rail"
- — The site's Newest Thread. Posted in » Model railroading in the UK
-
- » DRMM 2012: Kein 35Mhz-B-Band
- — The site's Last Updated Thread. Posted in » RC and scale modeling (German)
-
XML Sitemap