Hi All I am looking for a manual for a Tyzack & Sons lathe. I cannot find a model number. However it has a 4 inch chuck, 6 inch face plate & approx 12 inches between centres. Any help would be appreciated. (Can proivide a picture if that will help)
I find it interesting ,I didn't know that Tyzack & Sons made lathes . I collect old wood working tools ,amoung other things, and I have a few Tyzack hand saws .
Don't bother looking for a Zyto manual - I owned a Zyto (briefly!) and the manual was never written. The most I managed to find was the changewheel chart, which I took a scan of before I sold the lathe on - email me offline if you want me to send you a copy of the JPG.
There were one or two articles published in ME on improvements to the Zyto (and boy, did it need them - the rack and pinion sadle traverse was interesting as it works bass ackwards - crank clockwise and the saddle heads for the chick! Way too exciting.). I was originally planning to turn it into a decent lathe, but decided that life was too short and that I would be better off starting with something reasonable in the first place.
I bought my Zyto 3 and an eigth from the Estate of Dr Clifford Arthur who had built Gauge 1 loco's on it. He was a relative of James Watt which speaks volumes! I wrote up to Myford because quite a lot is ML2, 3 or 4 and the changewheels and the vertical slide are 'Myford'. In the absence of a manual- people were not expected to need manuals- the best reference is to go back through the old Model Engineers and get out out the 'Martin Cleeve' articles.
I still have the vice and vertical slide. Sadly, my efforts to get the Cleeve articles onto the net were 'screwed up' by Magicalia. I still have the little ML manual on file- if it helps Cheers
Hey, did you know that in Australia, chicks are called chucks ? So, you could chuck us a chick, as long as it is a 3 jaw chick chuck ! Cheers to all. Brad.
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.