Re: 300% Modulus
Perhaps they are talking about elongation? http://performancesimulations.com/scnshot4.htm performancesimulations.com
6

Need info on low speed rotational transducers
Dear friends; I am new to this newsgroup. I would appreciate your help on locating sources of technical info on "Very low speed rotational transducers" Thanks Sina
4

Linear Thermal Expansion
How do I calculate an amount of thermal expansion for a given shape if you have Coefficient of Linear Thermal Expansion (7.2x105 in my case) Thanks, Alex
5

Pressure vessels -- from tender to manufacturing drawings
[this message also appears in Hi all, Does anyone know a software which can handle the following features: - Pressure vessel (mechanical) design (European PED and US American ASME standards) - Use...

Re: overfilling a motorcycle engine.
Unless you put a stabilizer in the gas, dump the tank and fill with fresh fuel, remove the extra oil, and if a multicyclinder, balance the carbs.
5

mcse vs p.eng !
hey guys i found this article from the net, what do u think of it?? from "I am an engineer. You are an MCSE. He is a train driver" By Andrew Orlowski in San Francisco Posted: 15/11/2002 at 01:54 GMT...

Re: Anyone have an MS in Manufacturing Engineering?
I would recommend contacting a school that you might be interested in and writing to some of the alumni. I have a BSME, majoring in Japanese, and an MSME from BYU, and I know they have a pretty good...

Hertzian pressures calculation
Hi all, I'm working on hertzian pressures calculation between the pivot and the socket of a roller finger follower. Both the surface can be assumed spherical with a bit difference on the diameters. I...
1

how to get xy coordinates of selected nodes under ANSYS ??
Hi all, I have some problem to obtain xy coordinates of selected nodes under ANSYS 6 (with APDL code). I want to know the xy coordinate of node I previously selected. I want to do that in order to...
1

friction between teflon and delrin
Does Teflon against Delrin have less friction than Delrin against polished stainless steel? Thanks
20

Re: less friction: delrin on delrin or delrin on steel?
Steel? Did I win? Delrin on delrin will wipe together-too smooth. Polished steel works better. Did I win? wws
8

Are properties of the structure independent in each part?
Dear all, I am doing some research on modeling of uncertainty in computational mechanics. My question is: Are properties of the structure independent in each part of the structure? I check some...
1

T rows table
Hello. I'm not a mechanic so forgive me my question :) I need to buy or make a work table for cnc machine. The table needs to have T rows to easy attach a material and it has to be 2 x 2m. Is there...
4

UHMW-PE stiffnes
Will be a piece of 1/2" thick UHMW 1"x13" rigid so you cant's bend it manually? Thanks.
4

looking for cheap linear guide
Does anyone knows any low price polymer linear guide similar to IGUS N27? Thanks
2