I wanted to post this new product information in case it may be of any help to Electrcial maintenance and installation technicians.
----- Available soon, the Anaconda Air Snake Maintenance Multi-Tool is four tools-in-one: Unclogger, Sprayer, Injector and Applicator-Refiller. Invented by an HVAC maintenance technician, it can reduce the time of many costly maintenance tasks to minutes. It saves time by greatly reducing the "jerry-rigging" done in many maintenance tasks for lack of a proper tool. Most importantly, it permits maintenance staff to increase the number and variety of tasks they can do in a limited time period. As an Unclogger it gently unclogs tubes, pipes or drains from ½" to
4" diameter with variable-pressure compressed air or water blasts using supplied injector plugs. The Sprayer function can spray water, detergents, fungicides, bactericides or other chemicals in a fine mist up to a powerful saturating jet. As an air or fluid Injector it transfers a high volume blast of air, chemical solutions or lubricants, at over 20 gallons per minute. In Applicator-Refiller mode it applies or transfers solutions in bulk or small measured portions from the 2 gallon tank to small containers, equipment reservoirs or application sites. Here's the more relevent part: The Anaconda is also useful for electrical applications as a lubricant or fish-line plug injector for smoother wire pulling operations through long conduit. Completely self-contained, it can be pressure charged manually or continuously with a compressed air, CO2 or nitrogen portable tank or other source.----- It might be available by mid-summer, from Drum-Mates Inc. David, service technician