The idea behind this project reads clearly from the flying itself: one large turbine jet modelled on the Chengdu J-10, presented as a blend of raw speed and close-in aerobatics. That pairing is exactly what makes a scale delta interesting, and the maker leans into it with real commitment.
On the day, two people assemble the model and check it over on the grass before it flies. Connections get inspected inside the cockpit hatch before the canopy cover is secured, which strikes me as tidy pre-flight discipline. The pilot then taxies along the grass runway and lifts off quickly.
The airframe gives plenty to admire: a delta wing layout with canards, deployable landing gear, and a turbine that spools up from the rear exhaust cone. Labels on the model read KingTech K-210G, CORTEX PRO and CARF-Models. The finish is yellow, black and red graphics with a roaring tiger motif on the vertical stabilizer, which looks sharp without going over the top. In flight it performs inverted flight, aileron rolls, high-G turns, vertical climbs and low passes near the airfield buildings, then touches down smoothly onto the turf and stops.
One thing stays open: whether the airframe comes from CARF or Pilot RC has not been answered, and the cause of a bumpy stretch during the flight is unexplained too. Either answer would be welcome, since both are natural questions about a jet this capable.
Project by Club d'Aéromodélisme de Ribérac. Watch it on their YouTube channel: