Spirit Rover Nearly Ready to Roll

MEDIA RELATIONS OFFICE JET PROPULSION LABORATORY CALIFORNIA INSTITUTE OF TECHNOLOGY NATIONAL AERONAUTICS AND SPACE ADMINISTRATION
PASADENA, CALIFORNIA 91109. TELEPHONE (818) 354-5011 http://www.jpl.nasa.gov
Franklin O'Donnell (818) 354-5011 Jet Propulsion Laboratory, Pasadena, Calif.
Donald Savage (202) 358-1547 NASA Headquarters, Washington, D.C.
NEWS RELEASE: 2004-15 January 11, 2004
Spirit Rover Nearly Ready to Roll
NASA's Spirit rover now has its arm and all six of its wheels free, and only a single cable must be cut before it can turn and roll off its lander onto the soil of Mars. As that milestone is completed, scientists are taking opportunities to take extra pictures and other data.
During the past 24 hours -- the rover's 8th martian day on the planet, or "sol 8" -- pyro devices were fired slicing cables to free the rover's middle wheels and releasing pins that held in place its instrumented arm. The arm was then locked onto a hook where it will be stowed when the rover is driving.
Because one airbag remains adjacent to the lander's forward ramp, the rover will turn about 120 degrees to its right and exit the lander from the side facing west-northwest on the planet -- also the direction of an intriguing depression that scientists have dubbed Sleepy Hollow.
Current plans call for the rover to complete that turn in three steps, said Arthur Amador, one of the mission managers at NASA's Jet Propulsion Laboratory, Pasadena, Calif. As currently envisioned, during the coming martian day engineers will complete ground tests and execute dress rehearsals of the drive-off, or "egress."
On sol 10 -- the night of Monday-Tuesday, Jan. 12-13, California time -- engineers expect to sever the umbilical cord that connects the rover to its lander by firing a pyro device, the last of 126 pyro firings since Spirit separated from its cruise stage shortly before landing on Jan. 4 (Jan. 3 in U. S. time zones). Also on that day, the rover will execute the first of three parts of its turn when it moves clockwise (as viewed from above) about 45 degrees.
After taking and analyzing pictures to verify the first part of the turn, engineers anticipate completing it on sol 11 (night of Tuesday-Wednesday, Jan. 13-14). First, the rover will turn an additional 50 degrees and stop to take pictures. Then, if all is well, it will turn a final 20 to 25 degrees to position it precisely in front of one of its three exit ramps.
If no issues crop up as those steps are completed, the rover could drive off onto the martian soil no earlier than sol 12 (night of Wednesday-Thursday, Jan. 14-15). "But we adjust our schedule every day, based on flight events, so this remains an estimate," said Amador.
The rover's status overall is "pretty darn perfect," said Amador. He described the communication link from Mars to Earth as excellent, allowing the team to receive 170 megabits of data during the past day. All science data stored on the rover has been sent to Earth. The rover is generating 900 watt-hours of power per day and using 750 watt-hours, and its thermal condition is good, he added.
While engineers are completing and testing commands to execute the rover's turn and egress, the science team is enjoying an "unexpected dividend" of time to collect data, said Dr. John Callas, Mars Exploration Rover science manager at JPL.
Until now, all science observations have been planned far in advance, but the unfolding schedule of rover activities gave the team the opportunity to do their first on-the-fly planning for observations driven by previous results, Callas explained. In doing so they segued to a working style that they will practice on a day to day basis as the rover rolls across the surface of its landing site in Gusev Crater, named the Columbia Memorial Station.
In the next 24 hours, the team will collect 270 megabits of science data, considerably more than on any previous martian day. This will include a high-quality, 14-color mosaic taken by the panoramic camera of a third of the horizon toward Sleepy Hollow, the direction in which the rover will leave its lander.
In addition, they plan to complete two remaining "octants" (each a pie slice showing an eighth of the horizon) with the rover's miniature thermal emission spectrometer. These areas will also be rephotographed with the rover's panoramic camera in order to allow the camera and spectrometer data to be co-registered. Plans also call for the spectrometer to "stare" at three selected sites to collect very low-noise data, as well as calibration of another science instrument, the alpha particle X-ray spectrometer.
Spirit's twin Mars Exploration Rover, Opportunity, will reach Mars on Jan. 25 (Universal Time and EST; Jan. 24 PST). The rovers' main task is to spend three months exploring for clues in rocks and soil about whether the landing sites may have had abundant water for long enough in the past for life to appear. Pictures and detailed information from the mission is available at the project's Web site:
http://marsrovers.jpl.nasa.gov
JPL, a division of the California Institute of Technology, manages the Mars Exploration Rover project for NASA's Office of Space Science, Washington.
-end-
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload
snipped-for-privacy@earthlink.net (Ron) wrote in message

....
Ron - We are getting fantastic pictures - but can I put in a plea for more full colour stereo pairs to be released - since the original navcam stereo panoramic pair all the stereo pictures have been red/green.
I have written and made available on the web a stereo panoramic viewer program, for people to pan and zoom into stereo panoramic pairs from the Rovers - see :
StereoPanorama at http://www.lab-tools.com or http://www.kent.ac.uk/physical-sciences/lab-tools/StereoPanorama/index.html
cheers, beau webber
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload

http://www.kent.ac.uk/physical-sciences/lab-tools/StereoPanorama/index.html
This would be nice, but let's not get ahead of ourselves. After the images, the *first* thing we need is some georeferencing. How about, N, S, E, W on the panorama? I saw one view, carefully hidden on the website, showing the landing site from overhead with an arrow pointing to the spot. How about a scale? Again, N, S, E, W markers?
Frank
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload
Frank posted:

To get the approximate directions on the new 360 degree pan is actually fairly simple. The large scale pan can be divided into four equal-sized images. The center of each of those divided segments is very roughly set up to be one of the cardinal directions. The first of the four would be north, the second would be east, the third would be south and the fourth (the one of the four on the right) would be west. The large clump of hills, for example, is roughly southeast of the lander. As far as the images from orbit showing the landing site, north is almost always at the top. Clear skies to you.
--
David W. Knisely snipped-for-privacy@navix.net
Prairie Astronomy Club: http://www.prairieastronomyclub.org
  Click to see the full signature.
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload

Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload

Per yesterday's press briefing, they are currently calling these the "eastern hills," but a more poetic name is reportedly under consideration. The current plan is to investigate a nearby crater (250 meters) which is the deepest one within range. After that, they will head for the hills and see how close they can get! Pretty dramatic I'd say.
Here's a crop of the eastern hills:
http://www.copperas.com/astro/easthills.jpg
And closer:
http://www.copperas.co/astro/easthills2.jpg
Joe
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload

Site Timeline

  • - the site's newest thread. Posted in

Polytechforum.com is a website by engineers for engineers. It is not affiliated with any of manufacturers or vendors discussed here. All logos and trade names are the property of their respective owners.