ARM: Review - DML 1/35 scale German Rocket Launcher w/Crew

Kit Review: Dragon Models Limited 1/35 scale =9139-=9145 Series Kit No.

6509; German Rocket Launcher w/Crew; 185parts (120 etched brass, 65 in grey styrene); price US$14.50

Advantages: nice use of existing kit parts to create a new model with nicely posed action

Disadvantages: rocket launcher frames are all brass

Rating: Recommended

Recommendation: for all German rocket launcher fans

The Germans and the Soviets were the biggest users of rocket projectiles in the Second World War, with the Russians preferring smaller rockets in the 82mm and 132mm calibers and the Germans using four others =96 15 cm, 21 cm, 28 cm and 32 cm. The advantages to rockets are the ability to put a great number of rounds on target very quickly and more explosive per round (and anti-personnel effects) than with conventional tube artillery; the drawbacks are usually shorter range and less accuracy, ergo requiring mass.

DML has now combined the figures from the 12 cm mortar crew (No.

6090) with the rockets from their =93Stuka zu fuss=94 kits and added a new launcher rack and rails to create the four-round ground mount version of the launcher. But in this case, unlike other DML kits in the past, it requires the entire launcher frame to be built up from etched brass =96 30 pieces to each one. As a result, the appeal of this kit will be up to the modeler: if you have experience in working with brass and can solder, it will be a stunner when completed; if not, it could be a hard and frustrating slog which may not end successfully.

The rockets are the nicely done efforts seen earlier in the Sd.Kfz.

251 =93Stuka zu fuss=94 close support rocket launcher halftracks, and come with two 28 cm and two 32 cm rockets. Decals are included that indicate which is which.

The figures are wearing the winter camouflage parkas and of the =93Gen1" series =96 each figure consists of seven parts: legs, arms, torso, collar, head and helmet. They transpose pretty well with the bomb-loading figure from the mortar now holding up the front of one of the crates. The rest are in suitable poses for use with the launcher =96 e.g. laying the sights, giving the firing orders, and checking the rockets in their launcher frame.

Overall, if you like brass this is a lovely kit; if not, you may wish to give it a pass.

Thanks to Freddie Leung for the review sample.

Cookie Sewell

Reply to
AMPSOne
Loading thread data ...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.