ARM: Review - Hobby Boss 1/35 scale M3A1 White Scout Car - Late Production

Kit Review: Hobby Boss 1/35 scale Kit No. 82452; U. S. M3A1 =93White
Scout Car=94 Late Production; 296 parts (277 in tan styrene, 15 etched
brass, 4 clear styrene); price $50-54
Advantages: superior kit to the venerable Peerless Max vehicle; scale
machine guns with open bores; nearly complete engine; smart use of
etched brass
Disadvantages: no radio sets; some mix of features
Rating: Highly Recommended
Recommendation: for all US and Allied wheeled armor fans
Prior to WWII most nations saw a need for both armored tracked and
wheeled vehicles, with the latter primarily operating as road
reconnaissance units with some offroad capability. The US Army started
to seriously approach this problem in 1925, going through a number of
prototype vehicles of varying levels of success. Most of them like the
6 x 4 M1 were pretty much road bound as they did not have a driven
front axle, suitable ground clearance, and used commercial =93street=94
tires.
In 1935 things began to crystalize and the M2 Scout Car was developed
using a Corbitt truck chassis. An improved variant, the M2A1, was
introduced in 1938 and was the first to sport the =93tourelle=94 armament
mounting, better known as a skate rail. The M2A1 was soon handed over
to the White Motor Company, who modified it and were responsible for
the new M3. Between 1937-1939 a total of 100 M3s were built and
delivered to the Army.
In 1939 White modified the scout car to produce the M3A1. This had a
wider body, =93combat=94 wheels, lowered skate rail, new headlights, no
rear door, jerry can racks, and new seating. This was approved and
went into large-scale production, with nearly 20,900 vehicle being
delivered through early 1944. More than one-third went to the British,
3,310 to the Soviet Union, and 104 to China. But as the US Army felt
the vehicle was not sufficiently off-road capable, its functions were
replaced by the M8 armored car and M20 scout car. However, as the M3A1
was perfectly fine for semi-tactical use, it was a popular vehicle
with headquarters units as it was easy to modify and equip with
necessary radio sets.
More than 35 years ago Peerless Max released a kit of this vehicle,
and for many years it was sought after by collectors and modelers
alike. It was later released by Italeri, Airfix and Zvezda. But as
time wore on the kit started to show its age, mostly in the fact that
it was apparently derived from the Monogram M3 halftrack from the late
1950s and started out being too wide with overscale machine guns.
Now Hobby Boss has released two kits - one of the early model and one
of the later variant. As I have wanted to build a model of one of the
=93wildcat=94 conversions of the M3A1, a late production one from the 3rd
Armored Division headquarters named =93Panther=94, I have been eagerly
awaiting this kit.
The kit is a really nice effort and fixes most of the problems with
the old Peerless Max kit, starting with a scale overall width of 80
inches. It has a very involved and complex method for representing the
skate rail (three rails sandwiched together and separate mounts inside
the hull body). Seats are provided for a full compliment of eight
personnel and a whip mast base is also included.
This is one of the kit=92s few failings, as nearly all M3A1s carried at
least one radio (most later had two) and the kit comes with none. I am
not sure why Hobby Boss did not do a bit more research and at least
provide an SCR-510/610 set for the vehicle. As my goal model =93Panther=94
had an SCR-5xx command set and an SCR-193 long range HF command set I
will have to scrounge them up.
The skate rail is very nice and easy to assemble for all its
complexity, but it is the early production one and not the later
variant suitable for this variant. (This time I luck out, as someone
in division ordnance replaced it with an M49A1 type ring mount on
=93Panther!=94) But the rest of the later features seem to be present. It
has the heavy =93combat wheels=94 and non-directional tires, the separate
mounts for the jerry cans and jerry cans (reminiscent of the old
Squadron/Historex ones as the body is one piece with a separate top,
handle and spout), the blackout light, and the later model machine
guns (air cooled .30s and an M2HB with =93slatted=94 barrel sleeve).
Assembly is straightforward. Starting with the engine (complete as
far as it goes, but it could use belts and wires) it goes right down
the chassis with the wheels in Steps 8 and 9. As near as I can figure
(they have clear arrows or =93do not cement=94) the wheels are held in
place by their hubs and are meant to rotate.
In the interior all seats have separate pads and back cushions, and
all of the mounts for the skate rail are separate parts. All three
machine guns are provided with tripods that mount on the rear plate.
As this is the later model it has new front sides which have holes
for the jerry can mounts, as well as the later armored windscreen
cover. The machine guns are added in Step 22 and have pretty well
detailed mounts, which slip over the rail so they will slide.
Three finishing options are offered, all using an olive drab base:
4th Armored Division recon, B23 (I think this should be 84th
Reconnaissance Battalion); Red Army (=93Vpered na Zapad!=94 (Forward to
the West) on the front and sides, red stars); 2nd Division Blindee,
Free French Army T17).
Overall the biggest ding I have on this kit is the lack of radios.
Cookie Sewell
Reply to
AMPSOne
Loading thread data ...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.