ARM: Review - Zvezda 1/35 scale KV-2 Heavy Tank

Kit Review: Zvezda 1/35 scale Kit No. 3608; KV-2 Soviet Heavy Tank; 395 par
ts (372 in olive drab plastic, 22 in silver vinyl, 1 clear styrene); retail
price US$38.99
Advantages: new mold kits adds some interior details for the turret; offers
some other interior details; choice of vinyl or ?link and length? trac
ks
Disadvantages: about 3mm too short, some errors in specific features
Rating: Recommended
Recommendation: for all Soviet armor fans, especially early war
Zvezda has followed its KV-1 Model 1940 kit (No. 3624) with the KV-2 heavy
tank version using the production turret design. This was developed during
1939 as a ?bunker buster? to deal with Finnish engineer works along th
e ?Mannerheim Line? during the ?Winter War.? After 24 KV s Bol?sh
oy Bashnoy (KV ?Big Turret?) tanks were built in 1940, a new turret was
introduced and another 191 tanks were built as the KV-2. But they overload
ed the already stressed KV chassis, and most of them failed in action befor
e they got into combat. Only one tank still exists in Moscow (a later produ
ction hull with a KV-2 turret on it) and apparently a second vehicle has no
w been put on display in Nizhniy Tagil with a new construction replica turr
et on a recovered KV-1 hull.
The KV-2 mounted a 152mm M-10 howitzer in its naval-like turret with a 7.6
2mm DT machine gun in the hull and a second DT coaxial in a ball mount on t
he rear turret plate. At point blank range the gun was devastating to any f
ixed structure or tank, but it was very clumsy and difficult to maneuver in
a swirling combat situation.
Zvezda is an improving company and is now starting to produce world-class
kits like their T-90A kit, but this one was designed just prior to that lev
el of achievement. This kit is one of their nicer ones and has some really
good touches, such as a partial interior and a choice between vinyl and ?
link and length? styrene tracks. The vinyl tracks in Zvezda kits, however
, tend to be tauter than bowstrings so this latter feature is most welcome.

The kit is based on their Model 1940/1941 kits but has a new set of 78 par
ts on two sprues for the turret. Surprisingly the turret is a ?flat? mo
lding in that it consists of six main parts (top, bottom, sides, front and
back) with details added on. The M-10 gun is nicely done but comes with the
odd three-section barrel that has puzzled many Russian modelers. The conse
nsus opinion is that the three sections were actually shrouds for the gun b
arrel and were not present on all tanks, so some vehicles appear to have it
and others do not. The gun does come with the basic elevation and cradle m
echanisms, but other than the mount for the coaxial gun there is nothing in
side the turret.
Those modelers who read Russian or have been fortunate enough to either ge
t a copy of the book ?Tyazhelyy Tank KV-2: ?Neuayazvimyy? Koloss Stal
ina? (KV-2 Heavy Tank: Stalin?s ?Invulnerable? Colossus) by Maksim
Kolomiyets (Yauza/EhKSMO Publishing, Moscow 2001, ISBN 978-5-699-50462-6) w
ill note it comes with interior photos of the preserved tank in Moscow as w
ell as a copy of the factory blueprints from November 1940 that cover the i
nterior. This makes adding an interior to the tank a much easier task.
The interior of the hull provides an engine block top and air cleaner, but
the radiator grilles (C9) are solid and installed from the inside of the h
ull. The good news is that Zvezda did provide the curved frame on the outsi
de, so if you have a set of etched grilles the openings are cleaned out and
ready to install. Note that you will have to come up with the armored radi
ator guard covers if you use etched grilles, however. The same goes with th
e radiator air exhaust grille at the rear of the hull (A14) which is a sepa
rate part so it too can be replaced.
Assembly is typical of an eastern European kit ? flat hull sides which a
ttach to a belly plate, bow and stern plates, and the upper hull. It does c
ome with separate road wheel arms, and all wheels use vinyl ?keepers? s
o they are easily removed for painting.
The kit also provides three early-style ?ZIP? bins for tools and equip
ment.
The model, however, is not without quirks and one major issue ? accordin
g to checks with dimensions and plans published by some of the better Russi
an authors (Kolomiyets being the best ?single source?) the model is abo
ut 3mm too short. Width, height and all major components scale out right, b
ut then there are some ?please don?t look too close? items.
As before this model comes with the reinforced cast internally buffered ro
ad wheels, which were only used after mid 1941. But in the case of this tan
k as a good number were built in that time frame it is not wrong as it was
with the Model 1940 kit.
Finishing is simple ? 4BO green overall with one decal option: ?Za Rod
inu!? (For the Motherland!)
Overall, if you can live with the slightly short hull this is a nice kit a
nd a good place to start due to the turret construction to build a KV-2 wit
h a full turret interior. But for a better hull for the purist you may wish
to ?cross kit? with a KV-2 hull from Trumpeter.
Cookie Sewell
Reply to
AMPSOne
Loading thread data ...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.