1. Home
  2. ✈ RC aircraft models
  3. Vacuum bagging Canadians

Vacuum bagging Canadians

I have a lab size vacuum pump I want to get rid of $150 and also a
vacuum chamber or pot, welded SS with a plexiglass lid suitable for de-
airing resins etc $50.
Contact me off list
Brian.
Waterloo
Ont
Reply to
bfairey
Loading thread data ...
First thing I thought when I saw the thread title was "Why would you vacuum bag a Canadian?". :-)
Reply to
Vance

Site Timeline

Related

  • Restored vacuum pump

  • Hi all,Just thought I'd post a couple of pictures of the vacuum pump I was...

  • Vacuum pump seized?

  • I got this DV-142 vacuum pump (refrigeration style) and am a littlebit...

  • Rotary Vacuum pump repair

  • I've got a two stage rotary vane vacuum pump with some fine pitting in...

  • Vacuum bagging

  • Hi All I have a old 1700 vacuum motor can I use it for vacuum bagging or wont...

  • Vacuum bagging reloads....

  • Is there any negative aspects to vacuum bagging reloads (using a foodsaver)? The...

  • doerr vacuum pump

  • i hope somebody can help me. i bought a doerr pump at a garage sale theother...

  • Vacuum pump UNSTUCK -- and question

  • Thanks to Bill and Christopher. I took the vacuum pump apart. Removed the motor,...

  • vacuum bagging wings

  • Hey guys,I am vacuum bagging a set of wing using some West Systems epoxy and...

  • Re: Vacuum Bagging pumps

  • Ian -I have seen a lot of good vac bagging systems made with oldrefrigerator...

  • DIY - vacuum metalizing ?

  • The way I have seen this process done (lab environment) was that vacuumis drawn...

  • I Want To Build A Lawn Vacuum

  • I remember this topic was discussed a couple of years ago, but I want to add a...

  • Propane Tank to Vacuum Tank conversion

  • Ah yes, 29.8+ is about the closest to a perfect vacuum that can be made onEarth...

  • OT(?) vacuum pump

  • Hi all, I'm looking to buy a two stage vacuum pump. This may not be the...

  • venturi vacuum generator plans

  • I did all my vacuum bagging of hull and rudders using a 2 stage Gast vacuum...

  • composite fins without vacuum bagging?

  • Is there a good way to lay up carbon fiber over a light weight core without the...

  • Vacuum Pump Rating

  • I'm trying to vacuum form a sheet of 0.75mm plastic about two feetsquare. My...

  • Vacuum pump question

  • I have a chance to get an old, but serviceable medical vacuum pump, at a very...

  • DIY vacuum-pump? (for vacuum impregnating)

  • Hi!I need a better vacuum pump and a new shirt*)Has anybody got plans for a...

  • air/vacuum pump

  • I've been given a rotary air/vacuum pump, the type with the carbon vanes....

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.