Printed Circular Winder Tames a USB-C Cable

Nov 09, 2026 Last reply: 1 week ago 2 Replies
Jump to replies (2)

Anyone who has ever stuffed a USB-C cable into a bag knows the result: a knotted mess that takes ages to sort out. This build tackles that head on with a 3D-printed circular winder that keeps the cable coiled neatly until it is needed again.



The device comes together as a two-piece circular enclosure in lavender and white plastic. A center core sits inside an outer casing, and the two snap together during assembly. Notches on opposite sides accept the cable connectors, while the face carries a sliding lavender latch along with a perimeter handle and a central button.



Using it looks satisfyingly simple. Pulling the latch outward reveals a slot where the cable seats, then the perimeter handle turns to coil the cable around the internal spool. Sliding the latch back traps the cable in place. When both ends are pulled outward, the winder spins fast, and once the latch is pulled out again the cable can be removed. There is even a central button that pops both printed halves apart.



One open point: the build is made around a single USB-C cable, and nothing indicates how it copes with other cable thicknesses or lengths. That seems like the natural first question for anyone thinking about printing one.


That spinning action looks great. One question about the printing side of things: does the winder come off the bed as a single finished piece, or is it printed in separate sections that get joined afterwards? The snap-fit core and casing make me think it is the latter, but I would like to know for sure.

It is printed in two parts. The center core and the outer casing come off the bed as separate pieces, then snap together during assembly. The two halves can also be popped apart again with the central button, which fits with a snap-together design. Nothing about extra fitting work has been mentioned by the maker.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required