Hi I have recently purchased one Hurco bmc 30 with ultimax 1.3 controls with dual display. i think 1991 model It was working fine for some time. First by graphics CRT got blank followed by my Postion/program display CRT I find that the display 2 PCB card no. 4150174002 rev C with some problem. I find resistors r1 and r2 sitting next to the microprocessor are burnt and PCB also slightly damaged. I would like to rebuild the same for emergency purpose. Can someone help me with a photo of the PCB from front and back so that I can rebuild the pcb lines or short link the same through wires. I am unable to get the pcb readily anywhere. The card sits inside the front operator panel behind the keyboards. niks.