1. Home
  2. ⏣ General Metalworking
  3. Thin walled stainless

Thin walled stainless

Hi guys, I'm looking for some thin wall Stainless (304/316) tubing. 2" OD. (0.035 wall max.)
So McMaster-Carr has a nice selection.
formatting link

and I found burnsstainless on the web.
formatting link

The only place I found that listed walls thinner than 0.035 was vitaneedle.
formatting link

I sent them a quote request.
Just wondering if you know of other sources?
Well I'm mostly interested in walls less than 0.035".
(otherwise I'll just use McM-C)
Thanks,
George H.
Reply to
ggherold
Loading thread data ...
snipped-for-privacy@gmail.com fired this volley in news:4ff0e594-68e7-4a4e-9aee- snipped-for-privacy@googlegroups.com:
George, I'll have to do some digging. About a year ago, we ordered some 1" o.d. x 0.020" wall material in 316. We got it from VitaNeedle. They have 2" in 0.020 walls.
I remember it being DAMNED expensive. We bought two six-foot sticks, and I think it was more than $150.
Lloyd
Reply to
Lloyd E. Sponenburgh
Thanks Lloyd, I've got a quote request into vita needle. I'm prepared for sticker shock.
George H.
Reply to
ggherold

Site Timeline

Related

  • Thin walled closed end tubing

  • I'm trying to find a source for thin walled non-magnetic stainless...

  • Stainless 304& 316

  • Will I be able to mig weld stainless 304 & 316 together. I am making acooler...

  • Bending 304 stainless steel

  • I have 304 stainless steel bars. They are 3/16" thick by 1.5" wide (9feet each)....

  • how to join thin stainless steel sheet metal.

  • what are the possible ways to join very thin - 24 gauge stainlesssteel sheet...

  • Welding 304 stainless

  • --I've got the right rod for the job but I'm wondering if thatnickel...

  • stainless 304 versus 316

  • The 316 is much more "stainless" than 304. Standing water will rust the 304.

  • Best bandsaw blade for cutting 316 stainless bar

  • Hi Fellas,I've got to cut up a bunch of 1/2" 316-stainless round bar...

  • edge welding thin stainless

  • here's one for ya....012 stainless sheets need to be welded together only on...

  • 304 to unknown stainless what wire

  • GentelmenI will be welding up an exhaust system using mufflers and cats from a...

  • Cutting thin-wall tubing?

  • Got to cut a lot (several hundred cuts, maybe more) of thin-walled stainless...

  • Thin wall -arc

  • I need to stick weld some thin wall (less than 11 ga) square tube.What do you...

  • Welding 316, 304 stainless with 411 filler rod

  • I have a few pieces of 304, 316 stainless steel that I need to weldtogether to...

  • 316 Stainless tips?

  • 'noon all,Ive got to make 8 'corner pieces' (for want of a better...

  • Etching 304 Stainless Steel with Ferric Chloride Problems

  • Hello,We use Ferric Chloride in a spray etching application to etch 304...

  • Bending a Thin walled extrusion

  • We have to radius a thin walled Aluminium channel. Have any one gotsome...

  • 304 stainless etching

  • I am trying find the proper method to obtain photo quality acid etchingson...

  • Drilling 316 Stainless

  • Howdy again, feller metal reckers. I have some 1/4-inch 316 SS thru-the-wall...

  • Stainless 316 - Yikes!

  • First real bout with Stainess 316 today. What a disaster! Rat chewed finish...

  • Notching thin-walled aluminum tubing...

  • I need to notch some tubing for welding...it's 1" OD, .083 wall thickness,...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.