I got my Denford home and started to find out what it can do. I wa
immediately impressed by the ease that it can cut metal compared to m mini lathe but not having manual controls is a problem. I tried cuttin using the keyboard but the slow speed for the X and Z axis is too fas for most stuff.
I intend to upgrade the controls to be PC based using AWEM's desig minus the tool turret but for now I am finding out how to use the Ora CNC stuff.
I tried a simple program but I can't quite work out how best to set th machine origin. The machine has a floating origin which is supposed t be at the face of the workpeice on the Z axis. Tool number zero seem to be the reference which can be set but taking a facing cut whic gives Z=0. X is found by taking a light cut then measuring and enterin the diameter.
This is fine for tool zero but how do you set other tools up Presumably you don't take any cuts when setting up the other tools. A I missing something here.
Archi
-- amcne
----------------------------------------------------------------------- amcnee's Profile: