Hi folks. I hope someone can suggest a supplier for tiny machine screws, nuts and washers. The specs for the part I'm trying to mount (a tiny PCB) say to use 0-80 screws and nuts, but I think M1.4 or M1.5 should be fine as the hole itself isn't threaded. M1.6 unfortunately seems a smidgen too big and that's the smallest size I've been able to find.
Any suggestions for suppliers or types of suppliers (clock makers? opticians?) appreciated. I only need a couple of dozen.
Tim
"Ian Phillips" wrote: [tiny screws]
And the light goes on... Thanks Ian, I spent an hour searching the web last night but without the magic word 'micro'. I've found a couple of promising leads now.
Cheers,
Tim
Try doing a search for Acorn Fasteners, they are in Lingfield, near East Grinstead and have all sorts of things there - they will supply you in any amount
Actually, already had them bookmarked:
Try millhill supplies
Tim, let me know what you need as I have hundreds salvaged from the inside of hard disks. Just take spam out or the reply address.
Cheers,
Cliff
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.