Hello: I have P4 3 GHZ 1.5 GB RAM. But still Pro/e WF 2.0 (Pro/Intralink) runs very slow is there anyway I can increase (prioritize) CPU usage for this process because when I check CPU usage it says 1 or 2 %.
Thanks a lot.
Regards, Nilesh
What makes you think the CPU has anything to do with why it's running slow!?! Couldn't the CPU usage numbers spike when the processor gets fed a lot of data then drop when it's done with the heavy lifting? Couldn't the problem be that the processor is not getting fed at a constant rate so that it isn't always busy. This can happen when Pro/e, a heavily networked program, isn't getting stuff fed to it through the an IP address (could be a bad router, failing server, busy network) Anyway, if Pro/e is the only application running, it'll always have top priority. And, if two or three other apps are competing for resources, the processor should be chugging away at close to 100%, not necessarily on Pro/e. In that case, Pro/e could be slow, but the processor should be very busy.
It's probably something else slowing down the computer - like network delays or disk access. What is your available physical memory according to task manager? Is it also slow when you perform the same operations outside of Intralink?
Dave
snipped-for-privacy@gmail.com wrote:
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.