ARM: Review - DML 1/35 scale SAS 1/4 Ton 4 x 4 Patrol Car

Kit Review: Dragon Models Limited 1/35 scale ?39-?45 Series Kit No. 674 5; SAS 1/4 Ton 4 x 4 Patrol Car - Smart Kit; 276 parts (225 in grey styrene
, 47 etched brass, 4 clear styrene); pre-order price US$34.99 via Dragon US A Online
Advantages: corrections made to previously released kit; nice new set of US jerry cans; ?bookend? kit to match up with No. 6724
Disadvantages: some problems with ejection pin marks on body; very high pri ce for small kit
Rating: Highly Recommended
Recommendation: for all Commonwealth desert raider fans
    As noted with the previous SAS Jeep kit, Lieutenant Colonel David Sterling is one of the legendary figures to arise from British operations in North Africa and his Special Air Service (SAS) forces were long noted for their l ong range operations. One of the iconic photos of those operations has him standing next to a patrol led by a Lieutenant McDonald in a modified Willys MB jeep.
    This kit is the ?bookend? match to the previous upgraded SAS ?Desert Raider? kit (No. 6724) and includes all of that kit?s corrections but modifies the armament used on the vehicle. Note that once again because of the Chrysler Corporation demand for royalties for using the name ?Jeep? this kit, like the Opel Blitz before it, does not state what it IS but jus t sort of what it DOES.
    As it has corrected parts as well as some nice new ones it now comes on fo ur sprues ? two different wheels and tires are offered - but the body and frame are removed from their sprues and bagged separately in the box. The body is slide molded with all but the grille and rear plate. There are some serious injection pin marks on the bottom of the body and under the fender s, but other than the fender wells I don?t think most modelers will bothe r with removing them.
    The frame is also one piece with all braces and the rear ?bumperettes? molded in place. A so-so tow hook is also molded in place on the frame, bu t as the opening section of the military hitch is provided (part B45) as a separate part it will probably look better when assembled.
    The drive line is typical of modern kits, axles with differentials and a s eparate differential cover, separate shock absorbers, steering links and a tie rod. The transfer case comes with the front drive shaft in place but th e rear one is a separate part. The wheels are conventional front half with all tread/rear insert type (staggered tread pattern) and separate brake dru ms. Springs are the usual type, but the skid plate comes with the muffler a ttached (part B41) which is new to me for an assembly.
    The model comes with a cut-out grille but then emphasizes a new correct mo lded full grille which comes with the new set of universal tires. The Mark IA eyeball tells me they are virtually identical other than the missing bar s, so apparently DML has corrected the original grille with incorrect spaci ng and location of the blackout lights.          As some vehicles did use them the model comes with both an improved set of universal (combat) tires and wheels and a set of ?street? tires built up from five sections, two tread sections attached to either side of a cent ral disk section. But all of the photos I can find of the SAS modified jeep s show them with normal 7.00 x 16 universal tires on them. Be that as it ma y, they are in the box.
    This kit comes with four German ?jerry? cans and 8 new mold US models. Each of these has a separate body and top section, handle, and choice of s crew (fuel) or flip-up (water) lids. Etched brass tie-down straps are inclu ded for all of these cans to attach them to the vehicle. Five go on the hoo d, four on each side in the passenger compartment. Two spare tires and two etched brass sand channels go on the rear of the jeep.
    This vehicle offers a choice of armament to match either one of the other Jeeps in the famous photo of Colonel Stirling and Lieutenant McDonald. It c an be built with either twin K guns on the dashboard mount and a single M2 air-cooled .50 caliber on the pedestal mount, or vice versa. A third K gun is mounted for the use of the driver. All are slide molded with hollow bore s and come with six magazines for the K guns (with etched brass handles).
    The engine consists of 15 parts and looks the part, and it comes with a se parate radiator. This consists of three main parts, but it also has the hea dlights and blackout lights attached. These take clear lenses (for those wh o wish to use them) and must be installed before the radiator is mounted to the body. It also comes with an expansion tank (part B21) but no hoses are provided to connect them.
    The seats have separate pads and backs, and the controls are very complete , to include pedals and a sun compass (part B18).
    The same set of figures from Kit 6724 are included with this one as well. They are basically the same torso and legs with new heads and arms to diffe rentiate the driver and the passenger. Ron Volstad?s faithful copy of the iconic photo provides the best color and finishing options for these figur es.
    There are three finishing options: all three are for the SAS in North Afri ca and vary from sand with grey, sand with green, or all sand. There is no information if any of them used the street type tires and wheels. A tiny sh eet of Cartograf decals are included for the instruments and ?Water? st encils on the suitable cans.        
    Overall this is an alternate or complimentary model for the first kit (672 4) and can help created a nice diorama (especially if you can find a Stirli ng figure!)
    Thanks to Freddie Leung for the review sample.
Cookie Sewell
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload

Polytechforum.com is a website by engineers for engineers. It is not affiliated with any of manufacturers or vendors discussed here. All logos and trade names are the property of their respective owners.