The astonishing speed of the finished Benchy print run is perhaps the most striking feature of this setup. The maker completed the entire project in 2 minutes and 43 seconds, showcasing impressive high-speed capability. This was achieved using a compact CoreXY design executed on a Voron V0.1 kit.
Construction details reveal a robust framework built from black aluminum extrusion. A customized beige 3D-printed toolhead and custom black air ducts surrounding the print platform are standout elements. The maker also developed a custom mid-body designed for hotswapability and utilizes LDO Nema 14 motors configured for 48v operation. The entire system is controlled through Mainsail software, and the build utilizes a dual CoreXY belt drive system with a removable metal sheet on the heated bed.
Technical configurations are highly specific. The print speed was pushed to 600mm/s and the acceleration reached 200k. The setup employs a Bowden configuration, and a custom cowling was utilized to insulate the hotend. A known challenge involved the persistent warping and surface irregularities observed in the resulting boat model, which the maker noted.
An open question remains regarding the potential performance on a lower voltage. The maker speculated they might achieve higher speeds running the system at 24v.
Project by Fail Fast!. Watch it on their YouTube channel: