FA (UK Only) Various batches of servos, rx, batteries, engine starter etc

Hi Chaps,

I'm acttioning a bunch of stuff to release space and funds for the winter building session. Mainly servos and stuff as title but there is also a cordless engine starter that runs off its own internal battery packs.

The eBay item numbers are given below together with the auction blurb and current bids. Only around 24 hours to go so have a look and get a bargain.

Cheers,

Mike

1=2E Cordless engine starter eBay Item number: 250057180966 current bid =A311.50

This is an auction for an engine starter with a difference ! It has two off 1500 mAh 7.2V battery packs (supplied) which live inside the handle and deliver 14.4 Volts to two geared motors to deliver exceptional torque to start the most recalcitrant model engine. The starter has been modified to have Deans connectors on both batteries and starter as shown in the pix. These replace the awful Tamiya style connectors originally supplied.

2=2E Crimp tool eBay Item number: 250057180949 current bid =A31.00

This is an auction for a manual crimp tool suitable for use in making your own servo extensions etc. It can be used with the servo wire and plug/socket kits available from good model shops. Note : no wire or plugs are supplied. Supplied in good working order.

3=2E 7 off servos Futaba S3004 & 128 + Hitec HS322 eBay Item number: 250057180942 current bid =A34.20

This is an auction for 7 off standard servos comprising 3 off Futaba S3004 ball bearing servos, 3 off Futaba FP-S128 servos and a Hitec HS-322 servo. All the servos are tested and working. The S128 and HS-422 servos were taken from a second-hand heli I bought and so I cannot vouch for their condition (don't get me wrong - they seem to work OK, but I just don't know their provenance). The 3004 servos have been owned by me from new and one of them is suffering from crash damage and has its lugs removed. It still works but should be used for spares / repairs only. Otherwise all in working used condition, complete with a selection of Futaba control horns, mounting rubbers and eyelets as shown in the pix.

5=2E 6-Cell RX pack Sanyo CP 1300 cells eBay Item number: 250057180936 current bid =A31.00

This is an auction for a 6 cell RX battery made up of Sanyo CP1300 NiCad cells giving a nominal voltage of 7.2V. The pack was made by the well respected UK business called Overlander and has never been used. The pack could be disassembled and remade into a flight pack if you are competent to do that.

6=2E 4 off Futaba S3004 standard ball-raced servos eBay Item number: 250057180927 current bid =A313.01

This is an auction for 4 off Futaba S3004 ball bearing servos. All the servos are tested and working. Futaba servos are amongst the best you can buy and these standard servos are a cut above the rest because they have a ball-raced output arm. Unlike some other servos they can be used with either 4.8V or 6.0V RX packs for extra torque and speed. All in working used condition, complete with a selection of Futaba control horns, mounting rubbers and eyelets as shown in the pix.

7=2E 2 off BNIB Supertec S07 2BB MG servos eBay Item number: 250057180916 current bid =A38.50

This is an auction for 2 off BNIB Supertec S07 ball raced metal geared servos. The servos are brand new and have never been used or installed in a model. They come complete with all servo arms and mounting rubbers etc exactly as they came from the shop.

8=2E RX pack including Futaba 6 channel RX, 5 servos, battery and switch harness / charge jack eBay Item number: 250057140199 current bid =A316.55

This is an auction for a complete RX pack including a Futaba FP-R116FB

6 channel PPM RX, a Hitec HS322 servo, 4 off Futaba S3004 ball-raced servos, a 1000 mAh NiMH 4.8V RX battery and a switch harness with an integral charge socket and cover. Two of the 3004 servos have been used as aileron servos and have had their mounting lugs cut off to fit them in the wing, the other 3 servos are supplied complete with rubbers and eyelets along with a sample of spare servo arms as shown in the pix.
Reply to
Mike
Loading thread data ...

Hello what frequency does your Futaba FP-R116FB run on? I am looking fo

a 29 Mhz. If it is, is the receiver still available for sale? thk

-- awhonse

----------------------------------------------------------------------- awhonsen's Profile:

formatting link
this thread:
formatting link

Reply to
awhonsen

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.