Re: Newbee battery question

Horty,

You should enter 500mAh as the capacity for the pack. When you connect cells in series, the total pack has the same capacity as a single cell.

On the Intelli-control this setting really only has meaning for NiMH cells. The charger will stop when it reaches 110% of this value, so if you set it to 500mAh NiMH, it will stop charging when 550mAh has been put into the pack. Sort of a safety feature.

-- Frank B

----------------------------------------------------------------------------------- Posted from the RCGroups.com Discussion Forums. Visit us at

formatting link

Reply to
Frank B
Loading thread data ...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.