In the last week I have had 2 new Chevrolets that would not unlock when I pressed the electric unlock rocker switch inside the car. Both cars had the drivers window down about an inch and in both instances the customers had been trying to unlock the car by pressing the button with coathanger wire. I just figured the wire wasnt stiff enough but even when I used a 1/4 inch rod it would not unlock. It would activate when you press it in the "lock" direction but never in the "unlock" direction. I had to manipulate the linkages manually. After the customer started the car the electric buttons worked perfectly again. Sure would negate the use of an UTW tool or even one of the pry the door apart tools.
Electric lock button wont unlock the car
Jan 19, 2006
Last reply: 20 years ago
13 Replies
MCOT -Pull Handle. You have to pull the door handle to unlock when the ignition is off.
even one of the pry the door apart tools.
Ros, Goma865,
Please use the correct term for these tools so as not to confuse anyone. The regularly accepted acronym is OGISITDAT. This of course stands for Oh God, It's Stuck In The Door Again Tool.
I'm Sure Billy will have this on his famous word list if he has not already done so.
I use the under window tool all the time these days and NEVER get it stuck. not saying that I never have in the past but professionals learn from their mistakes..
I had a call once from a guy-could I remove an opening tool from his car door? a pretty new Passant IIRR, and the 'kid' thought he would be helpful, and stuck an MCOT (a CHEAP ONE, btw) in the door.. he SHOULD have treated it like a ford with button.. but he went for the inside lock-it can open anything...LOLOL
was fun digging out --Shiva--
I use the under window tool all the time these days and NEVER get it stuck. not saying that I never have in the past but professionals learn from their mistakes..
Can say the same thing myself. I broke one in two once-no damage to the car. Gotten them into too tight of a spot-just got it out and tried the "other tool". If it worked its way in...it will work it's way out in reverse. goma.
as long as 2 things.. you are not TOO far in.. OR, you wrap it around an intermediate piller in the car door that you did NOT know was present.. then it could not be backed out, ESPECIALLY when the kid bent it (told you it was cheap) trying.. --Shiva--
Excuse me. I did not see your post when I posted.
I've never wrapped a pillar-LOL I got stuck in the low side-LOL
I got stuck in the INSIDE once, but if you take the smaller tool, you can dig out the OTHER tool usually.. --Shiva--
yea, used a slim-jim to get one un-stuck before.
Used one on a Ford Focus or something last summer. There were cables for the window instead of the expected pillars and stuff.
Got the tool wrapped around the window cable and totally screwed that window up.
Thing is, it was the same week I was planning on leaving the company I was with, so I'm sure they think I sabotaged the car on purpose for them to pay for.
'Key wrote:
focus is a proprietary tool.. does it and a couple of others only.. I watched a Ford dealership-or rather heard about them, played with the doors for 2 HOURS trying to unlock one when they first came out before they called me..
--Shiva--
Professionals can learn from others mistakes too.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required