Low pressure and moderate temperature; 45 psi, 500F
No corrosion issues whatsoever so carbon steel would be ok but the cost must be as low as possible, in the 10 - 20 cents/foot range.
Bret Cahill
Cheap Steel Micro Tubing
Dec 16, 2008
7 Replies
May one ask the preferred ID?
:-)
BrianW
Try:
formatting link
Even 303 SS is only $0.70/ft.
This doesn't have to meet any high tolerances.
Bret Cahill
OD is 1/16" or 1 mm with a wall thickness ~ 1/10 - 1/4th the OD.
I can work around whatever is available.
Bret Cahill
I'd look at syringe tubing, used to make needles. Should be plenty of manufacturers.
David A. Smith
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required