1. Home
  2. Metallurgy discussions
  3. Labs who can run rotary slag testing of refractories?

Labs who can run rotary slag testing of refractories?

There's an ASTM method for testing refractory brick for resistance to
corrosion by molten slag, ASTM C 874, but the ASTM website doesn't
have a list of people that can run it (zero results). Does anyone
have any suggestions?
Reply to
hillpc
Loading thread data ...
You might try the Ceramic department at the University of Missouri - Rolla. There are other schools out there. You might also check out
formatting link
's directory for testing labes.
You might also call any of the refractory companies (Christy, Morco, etc.)
Jon
Reply to
jonceramic

Site Timeline

Related

  • Features, Classifications and Applications of Fused Cast Refractories

  • Fused cast refractories are materials that are produced by melting the raw ...

  • Features Of High Alumina Refractories

  • Aluminium Oxide (Al2O3 ) or alumina is one of the most versatile of refract ory...

  • Problems chipping 6011 slag

  • I tried some 7018AC and 6011 electrodes in welding class today. I normallyuse...

  • Application Of Refractories In Glass Industry

  • Refractories performance affects glass manufacture in the production cost a nd...

  • cleaning of slag?

  • perhaps a silly question: Is there any drawbacks , apart from cosmetics, in not...

  • Pictures of the insides of a Troyke rotary table

  • For those wondering about rotary tables and what are they like inside,here are...

  • really really sticky slag on 7018 or 7014?

  • I was having trouble with slag sticking. I was trying to run a really small...

  • Application Of Refractories In Different Parts Of Glass Furnaces

  • Refractories are the main building materials for glass furnaces. It has a d...

  • 45 KV Maxwell Labs CAPACITOR on Ebay

  • Anyone working on a high voltage project like a TEA CO2 Laser or Teslacoil can...

  • Fillet weld strength testing

  • Hi,Following our discussion about the strength of my two fillet welds, I decided...

  • ACS/Reaction Labs

  • Who was the principles of this company? What were their products? How longdid...

  • RPC run capacitors

  • I am considering adding some run capacitors to my self starting RPC. Iam reading...

  • Lubrication of a Troyke rotary table

  • I have finally got myself to fully disassemble and clean my TroykeDMT-15 rotary...

  • Rotary phase converter versus trying to run a VMC straight from single phase

  • Ok.I'm on the verge of buying a VMC with a 10HP, 8000 RPM spindle to putin...

  • Rotary table/indexer

  • Alright folks , I got the gear book (gotta brush up on my math !) ... and I...

  • rotary phase converters run in parallel

  • i am having difficulty starting my ir 10hp air compressor to start whenthere is...

  • Testing a rotary screw compressor Gunner style

  • I have a 50 HP rotary screw compressor. It is wired for 460. While thecontrol...

  • Can Romex touch the outside of a recessed can?

  • I am installing some recessed lights into an non-insulated ceiling. 3 of the...

  • Lister Rotary Pump

  • Peter Scales wrote,'Hi allI have what appears to be a Lister positive...

  • Can I run this with a rotary phase converter I use on my Bridgeport mill?

  • Hi folks, new to the group (as of today). I have a machine (grinder)that has...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.