1. Home
  2. Metallurgy discussions
  3. welding aluminum bronze to steel

welding aluminum bronze to steel

Bronze is sometimes welded to steel to prevent metal transfer between two
contacting surfaces in some rock crushers (not the crushing surfaces). Are
there any key points to remember when welding these two dissimilar metals?
Jon Juhlin
Reply to
Jon Juhlin
Loading thread data ...

Site Timeline

Related

  • Aluminum bronze flux?

  • - Should any flux be used with aluminum bronze? Borax or other glassy slagsas...

  • welding stainless steel to platinum

  • I have a problem figuring out how to weld platinum to stainless steel. What...

  • Welding Silver Steel

  • Im still relitivley new to welding but have just about managed to get mywelds...

  • Steel to aluminum welding

  • Still sounds like a corrosion starting point to me. (As one who remembers the...

  • Silicon Bronze MIG Welding

  • I just stuck a spool of Silicon Bronze in my new Lincoln Power MIG255C and am...

  • Welding aluminum with DC

  • I find welding aluminum with TIG to be easier than stick welding mildsteel.....

  • aluminum ship repair welding?

  • I have been asked to bid a job where I'd have to fabricate a simple handrail...

  • Welding cast steel to mild steel plate.

  • Is it ok to weld cast steel to mild steel plate? If so, what sort of rodshould I...

  • Welding an Aluminum Bellhousing?

  • Some 4x4 enthusiasts were discussing an engine swap that would use an aluminum...

  • Welding silicon bronze -- am I doing something wrong?

  • Hey Phil,Sounds like you're talking about brazing with bronze -- i.e., using...

  • Chemically removing aluminum from steel

  • I was wondering if anyone out there has any experience with a chemical thatwill...

  • Copper - Steel Welding/Soldering

  • I'm trying to weld or solder 14 guage copper wire to a steel horseshoefor an...

  • Welding aluminum with Millermatic 251

  • I would like to know if welding aluminum is possible with aMillermatic 251,...

  • Gas welding aluminum filters

  • Tinman's lenses work great for aluminum, and like shade 5 for steel,only...

  • Machining Aluminum Bronze

  • I want to machine some aluminum bronze for some bushings but have nevertried to...

  • The sound of TIG welding aluminum?

  • Hi,I used my Thermal Arc 185TSW to practice weld some .095-ish aluminum sheet...

  • How to tell if small rivets are steel or aluminum?

  • Anyone have some non-destructive tricks to quickly and accurately (andcheaply)...

  • Press Fit Pulley - Steel or Aluminum?

  • Given a power steering pulley that is press fit onto the end of thepump shaft...

  • TIG welding rod size (steel)

  • For regular kinds of TIG welding jobs, such as not too thick steel,would you say...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.