1. Home
  2. ⏣ General Metalworking
  3. FA Vintage Blacksmiths craft manual

FA Vintage Blacksmiths craft manual

The Blacksmiths Craft ,An Introduction to Smithing for Apprentices &
Craftsmen Pub.Rural Industries Bureau,grubby dustwrapper,original
owners inscription,otherwise a very good copy.108 pages
Anything by the RIB is normally excellent and this is no exception..a
proper craftsmans manual as opposed to a hobbyists book.
formatting link

Reply to
AlisEvans
Loading thread data ...

Site Timeline

Related

  • Vintage Blacksmiths craft manual

  • The Blacksmiths Craft ,An Introduction to Smithing for Apprentices &Craftsmen...

  • Silversmiths Manual vintage FA

  • Lovely old book ,with d/w on the ins and outs of the Silversmithsart.Very...

  • Gold Smiths Handbook old manual craft 1897 FA

  • The Goldsmith's Handbook Containing Full Instructions for the Alloying&...

  • Electro Plating silver gold nickel vintage manual 1918 FA

  • Electro Plating With Numerous Engravings & Diagrams by Paul Hasluck1918 VGC 160...

  • Electro Plating silver gold nickel vintage manual 1918 FA

  • Electro Plating With Numerous Engravings & Diagrams by Paul Hasluck1918 VGC 160...

  • Metal Engraving chasing vintage engravers manual 1908 FA

  • Engraving Metals by P.Hasluck 1908 VGC 160 pagesLovely old manual for the...

  • Vintage Smiths Work 1902 FA

  • Smiths Work with Numerous Engravings & Diagrams by Paul N Hasluck 1902VGC 160...

  • Miltary Modelling manual FA

  • Guide to Military Modelling by Ken Jones,VGC 142 pages.Great little manual for...

  • A good collection of Vintage craft (OT-ish)

  • Apologies for the picture quality (hand held in the...

  • Airco manual

  • An old friend just called. He has an Airco welder he's usedfor decades but...

  • Foundry Work casting vintage 1924 FA

  • Foundry Work by W Roland Needham 1924 The word "Specimen" is stampedonto title...

  • Modelling Soviet Aircraft manual FA

  • Modelling Modern Soviet Fighter Aircraft by Ken Duffey. VGCExcellent &...

  • Model Power boats vintage book FA

  • Model Power Boats by Vic Smeed VGC 128 pages.Great vintage modellors book...

  • Radio Control Helicopter manual FA

  • Radio Controlled Helicopters : The guide to building and flying r/c/helicopters...

  • Vintage Metal Turning book 1920s FA

  • Practical lessons in Metal Turning .Percival Marshall...

  • Grizzly DRO manual

  • Hi folks,Does anybody know where I can see a copy of the Operating manual for...

  • Metal Work Blacksmith manual 1906 FA

  • Metal Work, A Practical Handbook for the Amateur Worker inIron,Brass,Zinc,...

  • Radio Control Gliding Soaring vintage FA

  • Radio Control Soaring by Dave Hughes Good condition. 268 pages.This is a...

  • roland plotter manual

  • I just bought a Roland GRX-300AR plotter. There is no manual and none onthe net...

  • Vintage Traction Engine Modelling manual model mamod

  • Traction Engines Worth Modelling - and How To Model Them by W JHughes, 1969...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.