JIS 10305 DU JIS 10705 BU JIS 10705 AD
Anybody knows what the above japanese standards are? They must be something related to fasteners or materials used to manufacture fasteners.
If possible tell me the correspnding ISO or DIN or ANSI standard, or send me a description or picture.
Thanks to all Arto
Try :
You will need to have Adobe Acrobat Reader 5 or higher in order to read the downloaded files. For your convenience, a link to the Adobe Acrobat website is displayed below.
There are 3903 products that contain "JIS":
It takes a while to down load - but there are over 3000 for sale at this ANSI site. THey are handling the international codes now as well as US.
Martin [ member of JEDEC former member of EIA. ]
Are you sure of JIS ?
You will need to have Adobe Acrobat Reader 5 or higher in order to read the downloaded files. For your convenience, a link to the Adobe Acrobat website is displayed below.
There are 7 products that contain "10305":
Document # Document Title Price Member Discount Available ISO/TR 10305-2:2003 Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz $125.00 Yes ISO/TR 10305-1:2003 Road vehicles - Calibration of electromagnetic field strengh measuring devices - Part 1: Devices for measurement of electromagnetic fields at frequencies > 0 Hz $97.00 Yes DIN EN 10305-5 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold size square and rectangular tubes (FOREIGN STANDARD) $110.00 No DIN EN 10305-4 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems (FOREIGN STANDARD) $113.50 No DIN EN 10305-3 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes (FOREIGN STANDARD) $110.00 No DIN EN 10305-2 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes (FOREIGN STANDARD) $110.00 No DIN EN 10305-1 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes (FOREIGN STANDARD) $117.50 No
Martin
There are (in general) no equivalent iso/DIN/ANSI standards to JIS standards, just like there are non equivalences in other standards. They are different standards that have different requirements. jk
That is a bit strong - but you did say "in general" In Semi, even packaging there are joint and parallel standards. JEDEC is a big part of that.
For electrical - it is still a mess I suppose - mostly mine is better attitude. Sometimes it isn't.
Martin
Have something to add? Share your thoughts — no account required.
Ask the community — no account required