Hi Guys! I'm looking for someone to make me a roughly conical shape in hardwood. ~3.5" long x 2.5" wide, it would have a narrow taper along half the length, then a short straight section with a groove, then a wider taper going to the far end. It would also have a hole running at an angle from end to end, and an aluminum or Delrin insert set into the side. View it here:
formatting link
I would need a prototype of the insert first for testing, then an initial batch of 50. A hardwood dowel would slide through the angled hole, be held by the insert, and I would need a steel pointed tip to be somehow fastened at one end. All in all a pretty tricky and involved job. I can supply .igs files. Any takers? Robobass