ARM: Review - DML 1/35 scale Sexton II 25-pdr SP Tracked

Kit Review: Dragon Models Limited 1/35 scale ?39-?45 Series Kit No. 676
0; Sexton II 25-pdr SP Tracked - Smart Kit; 509 parts (501 in grey styrene,
6 etched brass, 2 DS Plastic track runs); pre-order price US$52.95 via Dra
gon USA Online
Advantages: first kit of this vehicle in styrene; makes use of proven compo
nents from previous DML M4 medium tank kits
Disadvantages: unsure if this is a WWII era vehicle or not (see text)
Rating: Highly Recommended
Recommendation: for all Commonwealth ?gonners?
While the US had provided the American M7 105mm HMC (?Priest?) to the
Commonwealth forces, it was not popular due to the fact that 105mm was not
a standard British caliber and they preferred the 25-pdr gun/howitzer as a
standardized weapons system. So experiments were carried out to adopt the s
ame concept and layout of the M7 Priest to use the 25 pounder on a Canadian
Ram chassis (basically the same M3 chassis used for the M7).
The new hull incorporated British design concepts (driver on the right, no
t the left) and fittings to include British radio sets and mountings for Br
en light machine guns vice the ?pulpit? for the M2 .50 caliber which ha
d given the Priest its nickname. Keeping in the same line (showing a good s
ense of humor!) the new gun was nicknamed the Sexton. Production began at t
he Montreal Locomotive Works (Canadian branch of the famous ALCO works, who
built medium tanks in the US) in late 1943 and provided some 2,150 self-pr
opelled guns to the Commonwealth forces. Easy to service and maintain, they
remained in service into the 1960s with some Commonwealth forces.
It has become something of an occasion when Dragon produces something othe
r than a vehicle wearing black Greek crosses, and this model has been eager
ly awaited by many fans of other forces. A quick check of the kit shows it
to be very accurate and well done, and DML is to be complemented for the ni
ce job they have done. It combines over 150 new parts with parts from three
previous DML M4 based kits and their 25-pdr Mark II towed gun to create a
detailed model of the Sexton. BUT...
The ?BUT? comes in as it is a perfect match to the vehicle currently r
esiding on the floor at ?Firepower?, the Royal Artillery Museum at Wool
wich, England. I took a number of photos of that vehicle and all of the det
ails captured by my camera are present here in the kit, such as the ?cage
? in front of the radio set to prevent damage and the loading port in the
left side of the hull. But this is most likely a vehicle which remained in
service well into the late 1950s or even 1960s with the Territorial Forces
(e.g. reserves) and as such I do not have a way to determine how much was
changed from WWII.
It has all of the hallmarks of a very late production vehicle ? ?upswe
pt? trailing bogies with ?spoked? welded road wheels, ?solid? dri
vers, welded idlers, a three-piece transmission cover with guards for the l
ights, cargo rails on either side of the engine deck, and the British patte
rn of steel cleat tracks. Earlier versions of the vehicle apparently had M3
style (top mounted return roller) bogies and either WE210 rubber or CMP ca
st tracks, no rear stowage bins, and other detail differences.
Also, there are no Bren guns provided for the hull even though the mount b
ases are present.
The model uses the hull from a DML M4 early production version with binnin
g molded onto the floor. The kit also comes with the large sprues for the M
4 generic suspension with different styles of wheels and ?flat? bogies
plus the add-on sprues for the ?spoked? wheels and ?upswept? bogies
. As noted the tracks are DS Plastic one-piece runs; unlike the helpful hin
ts in their 1/72 scale kits DML does not tell you how long they have to be
to give a tight but correct fit, so the modeler will have to trial and erro
r (these usually run a bit long and have to be shortened, but as the plasti
c can be cemented together with styrene cement it usually is not difficult
to fix).
The basic parts for the 25-pounder come on one sprue from the Mark II kit
and on one of the Sexton sprues, and while all styrene they look quite serv
The interior parts are fairly complete, but the ammunition lockers in the
right rear section of the open hull come closed so ?in action? posing w
ill take some scratchbuilding or after-market bits.
A considerable amount of detailing is provided for the engine deck, such a
s all of the pioneer tools (more than on a regular tank), cable reels, stow
age boxes, and etched brass strapping and engine air intake. This is over a
very shallow spot on the engine deck, and some modelers may wish to open i
t up to provide greater depth.
Design credit goes to Hirohisa Takada, but I know several others also part
icipated in the research and design work on this kit.
Five finishing options are provided: 147th (Essex Yeomanry) Field Regiment
, RHA, Normandy 1944 (black over olive, stars, F3-45, S233972, ?FEE?);
4th Field Regiment, RHA, 4th Armoured Brigade, Weert, 1944 (black over oliv
e, stars, S234006, ?Via Simba?); Unidentified Unit, Northwest Europe 19
44 (black over olive, stars, S233964, F4-45); 13th Regiment, RHA (HAC), Nor
thwest Europe 1944 (olive, stars, 76, no census number, ?HANNIBAL III?)
; Unidentified Unit, Northwest Europe 1945 (olive, small stars, S233861, no
markings). All have their census numbers provided via a ?number jungle
? on a small sheet of Cartograf decals. There have been some comments on
the Internet about the markings but all were researched by Ron Volstad duri
ng the painting of the box art; associations may not be corrected based on
who noted them in original materials.
Overall this is an excellent model and one with a long period of usefulnes
s and application, and with some tweaking and apropos figures can be used u
ntil fairly recent times.
Thanks to Freddie Leung for the review sample.
Cookie Sewell
Reply to
Loading thread data ...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.