ARM: Review - Miniarm 1/35 Scale Soviet ZIS-3 Gun with Crew

Kit Review: Miniart 1/35 Scale Kit No. 35032; Soviet 76.2mm Gun ZIS-3
w/Crew; 170 parts in grey styrene; retail price about US $22
Advantages: nice new kit of legendary field gun; crew figures well
done and compliment weapon
Disadvantages: parts are fragile and will need care removing them from
the sprues
Rating: Highly Recommended
Recommendation: for all Soviet fans and "Redlegs" in general
By 1930 the Soviets had standardized on a number of calibers of
artillery: 76.2mm for regimental and divisional weapons, 107mm for
divisional guns, 122mm for divisional howitzers and corps guns, 152mm
for corps howitzers and army level guns, and 203mm for army level
howitzers. Selecting a standard set of ballistics, most of the guns
were designed around those ballistics.
For most of the 1930s they tried to find a good combination of
features for the divisional 76.2mm gun. Weapons like the long-ranged
F-22 were good but too heavy and unwieldy for rapid maneuver. Finally,
the legendary V. G. Grabin found the right combination in his Model
1939 USV gun, but it still had some drawbacks, mostly with its
carriage, as it weighed in at 1,560 kilograms. In May 1941 Grabin put
forth a new version, which corrected many of the problems of the Model
1939; it was 440 kilograms lighter, lower, and now had a muzzle brake.
On 22 July 1941 the gun was submitted for approval, which took another
seven months, but it was accepted for service on 10 February 1942.
Some 1,000 guns were already in service, so it was considered "troop
tested."
Offical numbers indicate around 49,000 were built during the war
years as ZIS-3 division guns with others built for SP weapons or
replacements. The famous F-34 and ZIS-5 76.2mm tank guns were
ballistically nearly identical to the ZIS-3 and all three guns used
the same ammunition. Performance of the ZIS-3 with armor-piercing
ammunition was such that many tank destroyer battalions were equipped
with the gun for antitank use. In fact during the introduction of the
Tiger I into German service near Leningrad, the first two Tigers lost
in combat fell into a trap baited by a T-60 light tank and were
destroyed by broadside fire at point-blank range from a battery of
ZIS-3 guns.
In the mid 1970s Italeri came out with a very nice kit of the ZIS-3
that included a crew of three with the kit. Inexpensive and of pretty
high quality for the time it remained popular and is still in their
catalogue. But by now the kit does show its age, and thus the prospect
of a totally new kit from Miniart has been eagerly awaited.
The kit appears to live up to hopes, with the gun coming on two busy
sprues and another one providing a five man crew. The kit appears to
use a lot of the concepts either copied from or provided by DML, as
the kit's boxing, directions, parts breakdown, and figure set all
follow the DML concepts.
The gun comes with its wheels and tires split out with a separate hub
and five sections to form the tire - two sidewalls and three inner
ribs to give the tires tread pattern. (If you don't like them, they
are standard GAZ-AA wheels and those found with any of the Eastern
Express armored cars or Toko GAZ trucks should replace them.)
Construction is pretty straightforward beginning with the trails and
then the axle, carriage cradle ("l'yulka" in Russian) and locking
levers,wheels, barrel and recoil cylinders, muzzle brake, gun shield,
ammo crates, breech, and on to final assembly and then the crew. While
the directions are similar to DML's the latter should pay attention as
the Miniart layout and graphics are much clearer and present things in
a much less cluttered and more understandable format.
Parts are fragile and some of the smaller pieces were broken on the
sprues, but due to internal bagging all parts were still present so no
long-term harm was done.
The crew is excellent and is of the standard figure breakdown format
with six main parts per figure- head, torso, legs and arms. The crew
consists of a commander, gunner, loader and two "other numbers"
bringing up ammunition for the gun. Each figure has a helmet, canteen,
personal weapon (a TT pistol, two PPSh submachine guns, and two Moisin
carbines) and are fitted with the uniforms from 1943-1945. The
commander and gun crew are kneeling and the other two are crouching.
The kit comes with two ammo chests and a total of 10 complete 76.2mm
rounds and three casings - four of the rounds are the late war "arrow"
shells, however. (Also in the kit but unflagged are four 57mm rounds
and three casings for the 57mm ZIS-2 gun which uses the same
carriage.)
Two finishing schemes for the ZIS-3 are included, as are some photos
of ZIS-3 guns in action for reference. The ones here are pretty much
being used in antitank mode, so the modeler may take that as a
reference point. Colors are flagged for Tamiya, Revell, Humbrol and
Model Master paints.
Note that the crew itself is available separately as Miniart Kit No.
35031 for about US$9 so you can use it for any of the other Soviet era
artillery pieces on the market as well.
Overall this is a very nicely done kit and a bargain as it provides a
five man crew for the same basic price levels of some kits with just
the guns.
Cookie Sewell
Reply to
AMPSOne
Loading thread data ...
: : Disadvantages: parts are fragile and will need care removing them from : the sprues : Do you mean the parts are small/delicate, or that the plastic is brittle?
And, hopefully, we have moved beyond the monsteroursly large gate/small part that DML was fond of way back when...
Bruce
Reply to
Bruce Burden
=EF=BF=BD =EF=BF=BD =EF=BF=BD =EF=BF=BD Do you mean the parts are small/del= icate, or that the
A bit of both from what I can tell. Gates are small as well so parts do not get a great deal of support but at least unlike Alan you don't need a chainsaw to get them off!
Cookie Sewell
Reply to
AMPSOne

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.