ARM: Review - Panda 1/35 scale Russian BMD-2

Kit Review: Panda 1/35 scale Kit No. PH35009; Russian BMD-2; 651 parts (384
in brown styrene, 219 in dark green styrene, 48 etched brass); retail pric
e US$39.99
Advantages: easily the best BMD-2 kit at this time
Disadvantages: tracks are extremely finicky and overwrought
Rating: Recommended (Highly Recommended less tracks)
Recommendation: for all Russian/Soviet and airborne fans
When the Soviets invaded Afghanistan in December 1979, the first armored v
ehicles that hit the ground were VDV BMD-1 airborne infantry combat vehicle
s. But while useful and easier to transport than the larger BMP-1, they suf
fered the same problems once they got into the mountains. The 9M14 Malyutka
missile was close to useless and could not be reloaded easily, and the 73m
m closed breech grenade launcher could not elevate to a useful angle to eng
age Mujahedin in the hills.
As a result, just like the BMP the Soviets designed a new turret and armam
ent package for the BMD. But unlike the BMP-2 which received a wholly new t
urret that necessitated redesigning the upper hull and troop compartment, t
he BMD-2 came with a turret of the same dimensions as the BMP-1/BMD-1 turre
t. While cramped, the turret now mounted a 30mm 2A42 automatic cannon and 7
.62mm PKT machine gun. A launcher was fitted to the rear of the turret for
the 9M111/9M113 (AT-4SPIGOT/AT-5 SPANDREL) ATGM but due to the cramped cond
itions it had to be fired and controlled by a soldier outside the vehicle.
(The same thing happened to the BMP-1P with the same launcher and missile s
Some 2,500 BMD-2 vehicles were built to compliment the approximately 3,000
BMD-1s and today most of both series are in storage. The vehicle is still
in first-line service with the Russian VDV units.
Panda has now matched its BMD-1 with a kit of the BMD-2. Prior to this bot
h Eastern Express and Zvezda had released kits of the BMD-2 - the EE one ca
me with etched brass but the Zvezda kit was the better of the two. With the
release of this kit Panda has now taken over the lead.
The model is cleanly molded and uses slide molding to provide a hollow bor
e for the 30mm cannon. There is no interior at all and only minimal detail
on the inner sides of the hatches which is a shame. The kit is of one of th
e standard or later production vehicles with the "pierced dish" wheels (the
"starfish" wheels were on the early vehicles only). Note that both sets of
wheels are present in the kit so you could do a very early or standard pro
duction model from the kit. There is no clear sprue with the kit so all lig
hts are solid as are all viewers.
The one major bugaboo to the kit are the tracks - tiny links 7 x 3.5mm wit
h a SEPARATE guide tooth. Admittedly Panda has captured the correct profile
of the guide teeth - sort of like a profile section of a light bulb - but
the teeth are very tiny (about 2 x 1.5mm) and are going to be very tedious
to install.
The photoetched ranges from very useful to "are you kidding?" with incredi
bly small footman loops for tiedown straps. Like EE the headlight guards ar
e formed from bending etched parts to shape.
Finishing and marking is provided for four different vehicles: VDV, bort n
umber 735 (white) in a three-color camouflage scheme (sand/black/dark green
); bort number 702 (white), solid dark green; bort number 335 (white), Peac
ekeeping Forces (probably Georgia 2008), dark green with MS markings and bl
ue stripes; and rebel forces, Donbass, 2013 (dark green with two sets of st
encils and green tabs for "Donbass Peoples' Volunteers". Since Soviet/Russi
an airborne divisions had three regiments in each one the first one is prob
ably from the 3th Company (1st Battalion) of one, 702 is from the command g
roup (regiment), and 335 is from the 3rd Company of the 1st Battalion. Thes
e are provided on a medium sized sheet.
Overall this is a nice little kit but as with the BMD-1 kit the tracks wil
l drive some strong men to drink. If you can replacement with an easier set
it is mostly a simple kit to build.
Cookie Sewell
Reply to
Loading thread data ...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.