ARM: Review - Vision 1/35 scale M1A1 75mm Pack Howitzer

Kit Review: Vision Models 1/35 scale Kit No. VM-35001; U.S. M1A1 75mm Pack
Howitzer; 86 parts (56 parts in olive styrene, 29 rivet and bolt heads in s
tyrene, 1 turned brass muzzle); retail price US$29.99
Advantages: first all styrene kit of this popular weapon in this scale; off
ers two different versions to be built from the same kit (M1A1 or M116)
Disadvantages: several very small and fragile parts
Rating: Highly Recommended
Recommendation: for all WWII and Korean War US and other army artillery fan
s
Even back in the early days of artillery lightweight highly mobile pieces
were highly desirable and nearly all armies had something that fit the bill
. Some were single horse "galloper" guns and others include the dreaded "Th
ree Man Rifle" (it took three to carry it; in action one held it on his sho
ulder, one fired it, and the third man reportedly buried the first two afte
r their first shot!)
Eventually most armies decided in the late 19th Century to settle on light
howitzers in the 65-76mm range. Easily disassembled for carriage by horse,
mule or even manpack, they provided spot artillery firepower. The US was n
o different and developed the M1 75mm Pack Howitzer in the early 1920s for.
..cavalry. This gun was fitted with wooden wheels and could be disassembled
for mule or horse transport. A fixed carriage version was also developed b
ut was not popular due to its limited flexibility.
The M1 carriage with wooden wheels quickly gave way to the M8 with pneumat
ic tires, and from then on the gun was widely produced and saw wide service
. One popular use was with airborne units as it could be broken down into s
everal loads for paradrop, and both the US and UK airborne units made wide
use of it. It was also used as close support artillery with Marine Corps un
its. The gun itself was also borrowed and saw self-propelled use in the M8
75mm HMC and the LVT-A4 and -A5 amphibious armored vehicles. After the war
the howitzer was redesignated as the M116; the reason was simple - too many
"M1" guns! (M1 series 155mm gun, M1 series 155mm howitzer, M1 series 8" ho
witzer, M1 series 75mm pack howitzer...) They were used by other forces as
well as in MAP during the 1950s.
The howitzer was potent enough for its size and could fire a 13 pound HE-F
RAG round out to 8930 meters. With a weight of only 1,340 pounds it was eas
ily maneuvered, even in jungle conditions, in comparison with other guns an
d had more "bite" than the smaller 37mm M3. One documented case even has an
M8 HMC knocking out a Tiger I during the Battle of the Bulge (a one-in-a-t
housand shot into the open loading hatch in the back of the turret at short
range).
Up until now the only offerings of this gun in this scale have been either
white metal or resin; while this kit has been out a while I only found one
in my local hobby shop in August 2014. I believe at least Bronco also has
a kit out; that may be their own kit but I know Vision has swapped some of
its molds around to other manufacturers on occasion.
The kit is well designed and will permit breaking the gun down into transp
ort sections so diorama fans should be pleased. It comes with five full rou
nds of ammunition and a turned brass muzzle for the gun itself, which is a
nice touch. The model also offers either the directionless "universal" or "
mud" tires or a set of "street" tires which were also seen on the guns.
Assembly requires filing a notch in the upper barrel shroud (B35) to fit o
n the barrel section. There are some very small parts here such as the bree
ch lift ring (A5) so care must be taken. Note that the position of level or
elevated for the barrel must be chosen here.
The basic rear trail section is next followed by the specific version for
the M116. The front trail section follows and then the axle and wheels. Fin
al assembly is next and permits the modeler to mount the gun in "Battery" (
travel position) or firing position. A convenient exploded view of the enti
re kit shows all of the parts used. Note that the towing lunette (parts B9/
10) may be mounted in towing or combat position.
Finishing instructions are sketchy - paint the gun olive drab and the tire
s black. But the kit does include a very nice set of photos of a restored g
un in a museum for reference.
Overall this is a nicely done effort and one which can be used just about
anywhere and with any sort of towing vehicle from the quarter-ton to an M2
halftrack.
Cookie Sewell
Reply to
AMPSOne
Loading thread data ...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.