Re: Mastercam X3 Toolpath Is Still A Dead Entity

The way you're acting is as if Jon posted the social security numbers and home address of you, your wife and children in an attempt to bring harm to your family.

THAT would be malicious you stupid f*ck!

So Jon made you come here all by himself?

Hey Jon, ever consider changing your name to Merlin the Magician? :)

No Jon you keep putting me down because I will not acknowledge the fact that you say I helped one of your aliases a fact you can neither support or deny with facts or proff.

Wrong again you are trying to throw that control over me in trying to elude to the effect that I am a prick that that does not see where someone has given me praise. Where as the praise that I am being given is done so after the fact of the effort I have given and also done in a means that was not directly in my knowledge to you, but through a backwards method and I am suppose to after that event take your word for it when you have done it in a dis-honest way what ever your reason were to do so.

Get over yourself Jon.

Nope Jon just thinking is all I am after that choice is yours that is the choice God that walked on the earth as Man named Jesus Christ gave you.

Glad to know it goes both ways.

Jon with you there is no telling I have learned to look at anything that sounds to good to be true to be just that.

I will be very clear here. I have my own email on the board and I have my own email here. That is a direct way to contact me. I have 100's of people contact me for help and I help them the best I can. I am more than willing to help anyone and you again through a dishonest and not in a straight way feel you can only get help from me in that way. That shows you know nothing about me personally and put me in that group you keep saying I am not part of by these action, thus the reason I am here even saying anything.

So you can rant without specifics and other can. You bringing this up is doing the very thing you say I trying to put on you with the control aspect. You feel it was not needed again your right as you say I know not why you do what you do you know not why I do what I do. Also I do things in email to CNC and in the Beta forum that you have no clue what I do again trying to think for me and trying to put in my place, yet cant take me making you think about the place you keep putting others in which is the whole point of this exchange not a thing to do with Mastercam.

Again one mans trash is another man treasure and your perception on the world again only falls into what you think. Intelligence is not the measure of one mans writing skills and things they think the worlds needs it is the measure of one man using of those ideas to get the task at hand done. It must conform to your standards and someone has to agree that people are idiots and follow your idea of what an idiot is that so skewed it is not even funny to be in the clique you want forums and life to be about.

And this from your blog:

Quote: This is the kind of functionality that the e-Mastercam clique of idiots (John Paris, James Meyette, Matt Finley (Rekd), kunfuzed, hardmill, dragracer1951/ PBMW, Robert Brunson, Rickster, g-code, etc.) think is useless and not necessary despite several posters pointing out how valuable this functionality really is on the e-Mastercam forum. With this kind of clique mentality is it any wonder that CNC Software doesn=92t feel the pressure to add badly needed functionality that is missing in Mastercam?

This is polite and factual and relevant about the point you are making about graphical toolpath editing?? Again your circle mentality about do it a certain way and then demand others do a it a different way and then complain about the way people do it when they follow the model you laid in front of them as the way you find acceptable for just not others they then become idiots. Again your circle of logic is way off here.

Jon your idea about one thing and I have another idea about something guess what that is what makes us different. It is open to people to discuss Mastercam, not UG that is what the cnczone and here here is about and for not the emastercam forum. Clue in on the name Jon it has Mastercam in its name not please help my completion put me out of business because I am stupid for it name.

Ok Jon again using your logic allow me free access to your customers buyers since you feel so strongly about it.

Again your actions speak louder than what you think you are doing with comments like this being made::

Quote from your Blog:

This is the kind of functionality that the e-Mastercam clique of idiots (John Paris, James Meyette, Matt Finley (Rekd), kunfuzed, hardmill, dragracer1951/ PBMW, Robert Brunson, Rickster, g-code, etc.) think is useless and not necessary despite several posters pointing out how valuable this functionality really is on the e-Mastercam forum. With this kind of clique mentality is it any wonder that CNC Software doesn=92t feel the pressure to add badly needed functionality that is missing in Mastercam?

In the above comment where are you fact, your time study to show it importance, your video showing the need for it, the R.O.I. where CNC must invest X amount of dollars doing this?? Again the circle of logic.

No I am not in your mind and do not care to be it making the loop of what loops can be the thing that some look at the idea of something that may or may not go to the direction of the place it seems to be at where people sometimes look at the backside of the nothing that may or may not be the place on the spot of the point that was in the method of the thought that works in the idea of someone's logic.

Why do you link your "old" blog to be linked again to another blog? The navigation on the "new" one sucks ass BTW

The sheer level of narcissism it takes to think that anyone gives a shit about your opinion of toolpathing is mind boggling. You have porven time & time again through your various aliases that you have very basic knowlege of Mastercam at best. If narcissism were measured in units of mass, your skull would crush in on itself in a giant black hole of stupidity.

"I still do not understand why you can't and won't program the Ti-89 to do what Jim's calculator can do. If I don't get fired this week, I intend to buy one." - Jon Banquer -

Hi,

For a more detailed view of pathological narcissism and the Narcissistic Personality Disorder (NPD) - click on these links:

Other Personality Disorders

Pathological Narcissism and Other Mental Health Disorders

NPD (Narcissistic Personality Disorder) and AsPD (Antisocial Personality Disorder, Psychopathy, or Sociopathy)

Cyber Narcissist

The Narcissist as Know-it-all

Sam

"I love silly putty !!! " - Jon Banquer-

According to you Synch-Tech, your CAD-De-Jour strips design intent as it removes all constraints on imported solids. So Jon how do you determine design intent as well as critical fit, form & function dimensions on imported solids and re-constrain them using your CAD-De-Jour Synch-Tech program?

You say the original constraints are stripped by synchronous technology when importing non-native models. Prior to you hacking and whacking the model, how do you a machinist or anyone else determine original design intent on this imported model with regards to fit, form and function before making changes?

How do you determine which (critical) dimensions on the imported model should be locked and which can be unlocked?

Why do you continue to avoid answering direct on topic questions to support your positions?

What happened to SolidMap? According to you it answered all our questions about how the model was built in SolidWorks so how is this difficulty determining design intent still a concern?

Whatever happened to skeleton modeling, master modeling, horizontally structured modeling?

How come you can't format a simple spreadsheet?

[ Associativity is what the engineers I do work for want. We are frequently asked to change their designs to make them manufacturable / manufacturable at a cheaper price. We do design changes on a daily basis. ] -Jon Banquer-

What exactly is your engineering department doing while you say you are arbitrarily hacking and whacking their models on a daily basis?

Tom

format a spreadsheet....LOL

[

I've seen what Mastercam X tool libraries look like by opening them in Notepad. I understand that I can format the info any way I like in Excel most likely using VBA (if it's still called that). I have done this kind of thing in the past but at this point I don't wish to allocate the time and effort to do this and would prefer to purchase one that looks pretty and is easy for anyone to use without understanding Mastercam's tool library format. ] - Jon Banquer- (AKA: NeilJ)

Sure you have Jon, I am sure you did it in the past but just don't wish to allocate the time and effort to do this now, ....ROFLMAO.....you haven't a clue. You are so full of shit, if you really knew how to format a spreadsheet, it would be done, it's that fast, it's that easy.

Instead you have been posting all over the net saying it can't be done in MasterCAM. Then when told and shown how to do it you complained about the look, you even called it a mess. All it meant is you don't know how to format a simple spread sheet. Give it to your IT department, if it can't be done in short order then they are as incompetent at their job as you are.

Tom