I've found the white extruded foam at Home Depot in Livermore.
>
> No pink or blue anywhere I've looked.
>
> Paul
> --
First reference I've ever read to "white" extruded foam.
Who's the manufacturer? or what's the brand name?
half inch? one inch? two inch? 4'x8' sheets only? Available in larger sheets? Tongue & grooved?
Didn't find your answer? Ask the community — no account required.
P
Paul Newhouse
There was quite a thread about it a 6-8 months ago.
R-tech I think?
1.2" & 2" thick, in 4'x8' & 4'x4' sheets
Paul
D
Ditch
Really? I was just there and they had no foam of any kind whatsoever. CA sucks in the foam dept. I had the same problem when I lived in Southern CA. When I lived in Florida, the foam was coming out of everywhere, but I didn't have any room to do anything. *sigh*.
-John
*You are nothing until you have flown a Douglas, Lockheed, Grumman or North American*
D
D&Dfan
What do they use for home insulation in Ca.? Houses with A/C need insulation too.
A
Art Marsh
Owens-Corning seems to be king here. I did see some one inch styrofoam sheets on occasion.
Art
P
Paul Newhouse
The Home Depot, bracketed by Los Positas, N. Livermore, I580 & WalMart. go in the entrance, turn left on the first thru isle, just before the tool rental turn right on the last isle (sheet rock), go past the restrooms, on your left will be some of the big orange metal shelving, some if it sticks out into the isle and is marked "sheathing".
White foam in 1/2", 1" and 2" thicknesses, in 4'x8, 2'x4' sheets. Was there 1/24/2004:18:30. At first it looks like beads but, it's not. The bead look is from the gas bubbles formed in the materials expansion during its manufacture. It's supposedly environmentally safe, if it burns it doesn't produce any toxic gases so you just suffocate BUT you aren't poisoned!!
Price seems to have gone up about $5 a 2"x4'x8' sheet since I bought some 18 months ago.
There is also some fiberglass stuff that seemed interesting 2"x4'x8'?
Paul
L
Larry Blanchard
But that's not extruded poly, it's expanded poly (as you indicate). Not nearly as strong and rigid as the extruded, and even messier to shape than the extruded stuff.
P
Paul Newhouse
AH! Ok, expanded.
A little messy yes. Depends on how finely you want to shape it. We've only done a little with it as hilly terrain. Roughed out and then covered with cast clothe or hydrocal soaked paper towels. Mostly we are using it as a flat starting point for the WS risers.
So where is the pink and/or blue foam in CA???
Paul
D
Ditch
Thanks for the heads up on that. I will cehck it out this week. Wonder if the Dublin Home Depot has it?
-John
*You are nothing until you have flown a Douglas, Lockheed, Grumman or North American*
P
Paul Newhouse
Dunno. There is some at the club, I'll have to ask where they got it. If I think of it tomorrow, I have to go by Lowes, I'll check if they have the pink or blue.
Paul
D
D&Hfan
The pink is made by Owens-Corning and the blue is Dow. The white is not extruded and therefore not strong enough for a layout bed.
M
Maurice
For those looking for pink foam insulation sheets. If you go to Home Depot and give them the following SKU numbers, they should be able to get it for you. Please note that not all stores will or can order it. For 3/4" x2'x8' sheets the SKU is 465145
1"x2'x8' sheets SKU 465124
1.5" x2'x8' SKU 212711
2" x2'x8' SKU 923583 I "think" 2" is also available in 2'x8' sheets, but have not seen it lately. Maurice Kingston, PA, USA currently covered in snow.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required
Report Content
You are reporting this content to the moderators. They will look at it
ASAP.