Starting Bid is only $100.00 & No Reserve.
FEATURES:
a.. Wingspan: 55.9" (1420mm)
b.. Length: 48.4" (1230mm)
c.. Flying Weight: 6lbs (2700g)
d.. Construction: Built-up balsa and plywood
e.. Covering: Pre-applied heat shrink film, color scheme is yellow with
f.. red on the nose of the fuselage and forward wing section and a red
g.. diamond pattern extending from the front to the middle of the fuselage
h.. Wings: Two-piece wood, must be joined before installation
i.. Radio Compartment: Plywood reinforced, easily accessible over wing
j.. Cowling: Painted fiberglass
k.. Canopy: Clear, single
l.. Wheel Pants: Painted fiberglass
m.. Cockpit features: Detailed and painted pilot figure
n.. Landing gear: Pre-bent 3/16" (4mm) aluminum with 2-1/4" (57mm)
o.. treaded rubber main wheels and one 1" (25mm) rubber tail wheel with
p.. pre-bent 0.078" (2mm) thick wire
q.. Dual aileron servos: Yes, standard size and torque required
r.. Hardware: Hinges, wing bolts and all other required fasteners included
s.. Motor Mount: Nylon, with engine mounting hardware.
REQUIREMENTS:
a.. Engine: .46 cu in (7.5 cc) 2-stroke OR .53 cu in (8.7cc) 4-stroke
b.. Muffler: Standard type included with engine
c.. Radio: Four channel
d.. Servos: Five, 42 oz/in torque minimum
e.. 2-ailerons, 1-elevator, 1-rudder, 1-throttle)
f.. Servo Extension: One 6" (152mm) for ailerons
g.. Y-Harness: One for aileron servos
h.. Misc. Items: 2" (51mm) spinner, 1/4" foam rubber padding, 3' medium
i.. fuel tubing, fuel filter, propeller, building and field equipment.
INCLUDES:
a.. Prebuilt and pre-covered wings fuselage and tail section
b.. Aluminum main landing gear
c.. Tail wheel wire
d.. Nylon adjustable engine mount
e.. Main and tail wheels
f.. Pre-bent pushrods
g.. Hardware package
h.. Fiberglass cowling
i.. Fiberglass wheel pants
j.. Clear canopy
k.. Pilot figure
l.. Decals
m.. Photo-illustrated instruction