Hello,

I've been research creation particle higgs (CPH) theory and arrived at some interesting conclusions. First, that so called virtua are the plural of
pentaquark meaning a process of condesation is necessary in order to find
particles attributed to the Higgs guage boson. If your really into
monopole, super/string sequences then we may arrive at the correct energy
for the magnetic monopole (mangeton) and the weak monopole (klepton). This
in conjuction with the proton-decay/fusion hyper-plane between what is a
lattic-like configuration of the sixth dimension through which strings
intersect as an 'expansion' of four-space. So how could we induce a
magnetic field in copper by low carbon steel as a compression sufficient to
bond the two metals and what applications does this bonding process suggest?

The answer rests in being able to discriminate the phase component between two such parallel metal wires so that they could bond as a trans-phase plasma likely in lower precision capacities in the air. This means a stable notch filter must be constructed in order to find the frequency at which the spread spectrum response is known between a capacitance of the two with coils wrapped around the copper-steel core certain geometry. One could construct a Haar limiter in order to find the co-ordinates between the two wires in order that the wire wrapped inductivity around them of sufficient capacity must be canceled by the correct electrolytic material between the two wires at the terminals, such as live plant materials. The plant material performs what is known as hyper-plane induction so that further growth continues in terms of such virtua as could be realized in a a virtual space for example about pentaquarks in real space in general in conjuction with classes of leptons known as reptons and treptons not to be confused with the monopole, the actual monopole or pentaquark is what is actually necessary sitting between four-space and five-space on a six-dimensional line for the hyperplane induction of the fifth and seventh dimensions (plane of proton-decay and fusion) of the actual virtua. The magneton and klepton virtua are actually vibrations of the pentaquark in the strong harmonics of the spread spectrum between the two wires where the hyperplane is induced by the plant, or electrolyte in the presence of an electric current (the electric component of the component). Then, the transverse electric and magnetic fields are offset by the hyper field induction in order to balance the field between the steel wire and the copper wire inducing a magnetic field with a coil in conjuction with the electric Haar limiter, and magnetic notch filter each attributed to pulse width modulation assocaited with the geometry of the core and the source of the plant. As a electrolyte sufficient to balace the magnetic field between the copper and the steel, this geometry would form a spread spectrum so that information could be encoded by these leptons as in the reptons of vegetative life, and the treptons of in-organic material, which with the later which forms in animal life depedending on the cellulous content between the wires in the plasma present between phases in matter, less likely between more or greater viscocisties to a logarithmic degree, the coil should be suberged in an alkaline in order to activate the notrogen in the steel so that a six-dimensional destructive interfernece could be introduced in order to bond the two metals. So it should be possible to introduce a certain geometry between the two wires such that the notch filter could be shifted with the Haar limiter to reliably store and retrieve information by means of a non-uniform matrix or matroid associated with the geometry of the coil, likely a circle in the center between the two core wires associated with the matriod. A definite planar induction of the hyperfield ie. particles associated with the reaction, the virtua existent in virtual space conincident with an actual pentaquark wich performs the actual bonding, the virtua vibrations would be attributed to the capacitance between the two wires in terms of the actual repton source.

The rate of induction can be given by the molecular mass of the copper and the steel as a subspace of the steel being the matroid index of the copper being the relatively pure metal in order of the steel, the index times the copper mass in the spread spectrum field attributed to the strong nuclear force is given by the Hilbert space of the the molecular combination of the metals as a matroid for circular stator could store memory and communicate as a plasma induced by treptonic excitation associated with the bonding, note the colon means is:

x:=:x_n+1 x<=x_n+1:(a,b,c,d)<=y N= dx:a/dx:b dx:b/dx:a

n_i*c=ic, n_i=tan(i/4xpi) there-exists tan(3/4pi)

A_1=1/m_1, B_1=1/m_2 E=-1/m_1, F=-1/m_2 C_1=sec(2pim_1) D_1=sec(2pim_2) (A_1=1/B_1, E=1/F), (A_1=A_0/B_0, B_1=B_0/A_0),(E=B_0/D_0, F=(D_0/B_0)

The impulse response of the transfer function should yeild a triangular prism that can be used to monitor the spread spectrum by which the determinant should yield the planar induction as an inversion per m should yield a circle with the correct transfer function which should be variable as balanced by a Bessel function attributed to the pulse width between the copper and the steel with the plant between (letpon electrolyte), which as a capacitance acts to filter what is a highly non-linear reaction asscociated with reptons. Then a sampling function could be used to determine the strong nuclear carrier of an electromagnetic signal at a very high sampling rate, dynamic range is not as important with other ends of metallic/cyrtalline bonding such as tri-cupric oxide and di-silicon hydride. I digress, so the diameter of the wires in the core and coil must be calculated for the length of each respective wire must be calculated in order to find the access time as memory associated with the pulse-width attributed to the organic capacitor, which may be spread like plates, however a greater capacity, the two wires could penetrate a healthy stalk, it is also like communication however the plasma attributed to the pnetaquark induction, bonding may be treptonic associated with the electrolyte and therefore inertially grounded as memory, so that in order to communicate, the plasma must be displaced, as therefore within the stator maybe with another wire through the center. A grid could be developed to more effectively access memory and communicate as a means of digital addressing. The equation for the dimensions can be deduced from the previous equations:

L=surface-intregral_S q(x)/X:x_0:O dx (2pi*coil_length):(1/4pi*copper_length):(3/4pi*steel_length)=L X:copper mass O:steel mass q(x)=repton charge(steel-carbon) S=stator surface

Patrick Meuser

I've been research creation particle higgs (CPH) theory and arrived at some interesting conclusions. First, that so called virtua are the plural of

The answer rests in being able to discriminate the phase component between two such parallel metal wires so that they could bond as a trans-phase plasma likely in lower precision capacities in the air. This means a stable notch filter must be constructed in order to find the frequency at which the spread spectrum response is known between a capacitance of the two with coils wrapped around the copper-steel core certain geometry. One could construct a Haar limiter in order to find the co-ordinates between the two wires in order that the wire wrapped inductivity around them of sufficient capacity must be canceled by the correct electrolytic material between the two wires at the terminals, such as live plant materials. The plant material performs what is known as hyper-plane induction so that further growth continues in terms of such virtua as could be realized in a a virtual space for example about pentaquarks in real space in general in conjuction with classes of leptons known as reptons and treptons not to be confused with the monopole, the actual monopole or pentaquark is what is actually necessary sitting between four-space and five-space on a six-dimensional line for the hyperplane induction of the fifth and seventh dimensions (plane of proton-decay and fusion) of the actual virtua. The magneton and klepton virtua are actually vibrations of the pentaquark in the strong harmonics of the spread spectrum between the two wires where the hyperplane is induced by the plant, or electrolyte in the presence of an electric current (the electric component of the component). Then, the transverse electric and magnetic fields are offset by the hyper field induction in order to balance the field between the steel wire and the copper wire inducing a magnetic field with a coil in conjuction with the electric Haar limiter, and magnetic notch filter each attributed to pulse width modulation assocaited with the geometry of the core and the source of the plant. As a electrolyte sufficient to balace the magnetic field between the copper and the steel, this geometry would form a spread spectrum so that information could be encoded by these leptons as in the reptons of vegetative life, and the treptons of in-organic material, which with the later which forms in animal life depedending on the cellulous content between the wires in the plasma present between phases in matter, less likely between more or greater viscocisties to a logarithmic degree, the coil should be suberged in an alkaline in order to activate the notrogen in the steel so that a six-dimensional destructive interfernece could be introduced in order to bond the two metals. So it should be possible to introduce a certain geometry between the two wires such that the notch filter could be shifted with the Haar limiter to reliably store and retrieve information by means of a non-uniform matrix or matroid associated with the geometry of the coil, likely a circle in the center between the two core wires associated with the matriod. A definite planar induction of the hyperfield ie. particles associated with the reaction, the virtua existent in virtual space conincident with an actual pentaquark wich performs the actual bonding, the virtua vibrations would be attributed to the capacitance between the two wires in terms of the actual repton source.

The rate of induction can be given by the molecular mass of the copper and the steel as a subspace of the steel being the matroid index of the copper being the relatively pure metal in order of the steel, the index times the copper mass in the spread spectrum field attributed to the strong nuclear force is given by the Hilbert space of the the molecular combination of the metals as a matroid for circular stator could store memory and communicate as a plasma induced by treptonic excitation associated with the bonding, note the colon means is:

x:=:x_n+1 x<=x_n+1:(a,b,c,d)<=y N= dx:a/dx:b dx:b/dx:a

******dx:b/dx:c dx:c/dx:d ++ da:x/db:x db:x/dc:x=H(z)******PSI, grad X=ix+jy & dx/dy dx:b/dx:c dx:c/:dx:b dx:d/dx:c dx:a/dx:d db:x/da:x dc:x/dd:xn_i*c=ic, n_i=tan(i/4xpi) there-exists tan(3/4pi)

A_1=1/m_1, B_1=1/m_2 E=-1/m_1, F=-1/m_2 C_1=sec(2pim_1) D_1=sec(2pim_2) (A_1=1/B_1, E=1/F), (A_1=A_0/B_0, B_1=B_0/A_0),(E=B_0/D_0, F=(D_0/B_0)

The impulse response of the transfer function should yeild a triangular prism that can be used to monitor the spread spectrum by which the determinant should yield the planar induction as an inversion per m should yield a circle with the correct transfer function which should be variable as balanced by a Bessel function attributed to the pulse width between the copper and the steel with the plant between (letpon electrolyte), which as a capacitance acts to filter what is a highly non-linear reaction asscociated with reptons. Then a sampling function could be used to determine the strong nuclear carrier of an electromagnetic signal at a very high sampling rate, dynamic range is not as important with other ends of metallic/cyrtalline bonding such as tri-cupric oxide and di-silicon hydride. I digress, so the diameter of the wires in the core and coil must be calculated for the length of each respective wire must be calculated in order to find the access time as memory associated with the pulse-width attributed to the organic capacitor, which may be spread like plates, however a greater capacity, the two wires could penetrate a healthy stalk, it is also like communication however the plasma attributed to the pnetaquark induction, bonding may be treptonic associated with the electrolyte and therefore inertially grounded as memory, so that in order to communicate, the plasma must be displaced, as therefore within the stator maybe with another wire through the center. A grid could be developed to more effectively access memory and communicate as a means of digital addressing. The equation for the dimensions can be deduced from the previous equations:

L=surface-intregral_S q(x)/X:x_0:O dx (2pi*coil_length):(1/4pi*copper_length):(3/4pi*steel_length)=L X:copper mass O:steel mass q(x)=repton charge(steel-carbon) S=stator surface

Patrick Meuser