Cutting a shaft off a motor

You can buy the standard 4x6 metalcutting bandsaw on wheels from Homier now for $99.95. I'd come closer to buying one of these first, as you won't have to build a stand and you can make nice square cuts for your toolholders almost right outa the box. Their portable bandsaw is $49.95. Unless they are having a tent sale near you soon, freight may be an issue.

Space is the greatest issue for me; the portable plus shop-built stand will break down and fit in a drawer under my lathe. I also have a bunch of aluminum sheetstock that'll work nicely and the vise. If I didn't have the space constraint, buying a 4x6 bandsaw would indeed be a no-brainer. I'd buy one a year to avoid hacksaws or abrasive saws.

Thanks, Pete

Space is the greatest issue for me; the portable plus shop-built stand will break down and fit in a drawer under my lathe. I also have a bunch of aluminum sheetstock that'll work nicely and the vise. If I didn't have the space constraint, buying a 4x6 bandsaw would indeed be a no-brainer. I'd buy one a year to avoid hacksaws or abrasive saws.

Thanks, Pete

The way my luck runs, I would no sooner cut that shaft off and find a better motor for a RPC and then have a need for that motor.......Thats what happened when I originally made my first 3 h p RPC. I then made a

5 h p model and had a need for a 3 h p, but I had cut the shaft off.......I would simply attach a guard or duct tape a tin can over the end and leave it on the motor.

============================================== Put some color in your cheeks...garden naked! "The original frugal ponder" ~~~~ } ~~~~~~ } ~~~~~~~ }

Just what I was thinking, Roy. I have a few motors which have each been used for several projects over the course of time. 99.9999999% of projects require the motor to have a shaft :-). And when I haven't used a motor for a while I'll end up giving it away or selling it on eBay. I have too many right now...

As an aside, I came across a company selling phase convertors in the UK recently. They use a powder coated metal enclosure to house the capacitors, contactors etc., and mount the motor on top. Their motors didn't have a guard over the shaft and had a key left in the keyway. I'm surprised that this meets safety regulations.

Chris

I made a bunch of tool holders a while back. I cut the dovetail first and then used a bandsaw to slice off pieces as needed to make the individual toolholders. Worked well for me. Easy project and the Precision Tool Black makes them look factory made.

Ron Thompson On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA

hobby pages are here: Severe stupidity is self correcting, but mild stupidity is rampant in the land.

-Ron Thompson