DiAcro PDF issues

No problem with any of those with either Acrobat 5.0.5 full or Acrobat reader 6.0 under Win2K.

Best regards, Spehro Pefhany

Humm...I just upgraded to 7.0x

Ill locate the earlier versions. I even tried FoxitReader..says they have errors and cannot be repaired. Ill try on a different computer

Thanks

Gunner

"A prudent man foresees the difficulties ahead and prepares for them; the simpleton goes blindly on and suffers the consequences."

- Proverbs 22:3

Just tried it on 3 boxes, all running Adobe 7, including the linux box..all say the same thing...damaged and cannot be repaired.

Damn

Must be something in adobe 7. Ive downloaded the files 3 times

Gunner

"A prudent man foresees the difficulties ahead and prepares for them; the simpleton goes blindly on and suffers the consequences."

- Proverbs 22:3

On Mon, 20 Feb 2006 10:30:15 GMT, with neither quill nor qualm, Gunner quickly quoth:

I downloaded them in November and they still come up for me (in Acrobat Pro 6.) File sizes in Win2k are 3,967 and 5,865kb, respectively.

I did have a problem downloading the first part of the manual, though. I see 76kb for the first half and 3,923kb for the second.

I can't access your archive link today, either but that's probably from the storm over HotLanta this morning. I'll give it an hour. (Starband balks at bad weather around the uplink here or in the downlink to GA.)

I'm using Acrobat 6.0 on a win2000 machine, no problems. Downloaded them back when you posted the ?? and someone sent the link.

Dave

When I try to go to the url, all I get is a Can't Display the Page error message. Dave Foreman

They all work fine in Acrobat 7.0.1.

I just downloaded and opened the art of bending 1 & 2 with no problems. Use both Acrobat 5.0 and Reader 7.07. You probably got a bad download the first go and need to clear your cache or rename the files before you down load them. I had this problem with some huge Porsche manuals I was downloading and had to clear the cache several times to get good downloads. HTH Glenn

I was finally aboe to down load the art of Bending files. Part two read fine, but part one is only 136K and Acrobat Reader says the file is bad and can't be repaired. Dave Foreman

I wonder what the problem is? I had no problem the first time I tried each of them, and I previously downloaded the manual for my #2 hand punch.

Anyway, if anyone is really stuck, drop me an e-mail and I'll send the missing one. None of the ones I looked at is more than 5M, so they download fast and should make it through e-mail.

Best regards, Spehro Pefhany

I amusing IE 6. I just now chose a file, right clicked, open in new window and the fiiles mentioned downloaded and opened just fine. I was able to save and reopen again. Seems to work fine. Thanks for the link Gunner.

Gunner, I just downloaded the Art of Bending and the 24/36 finger brake manuals and they opened fine on acrobat 6.x.

I had a lot of trouble with acrobat 7.0 locking up my machine at work (XP) so I ripped it out and went back to 6.

Good Luck, Bob

Just tried "Open in New Window", says can't because the file is damaged and can't be reparired. Dave Foreman

They must of heard Gunner - the site is down now.

looks like the .org is off line.

Martin

Martin Eastburn @ home at Lions' Lair with our computer lionslair at consolidated dot net NRA LOH & Endowment Member NRA Second Amendment Task Force Charter Founder

Gunner wrote:

According to Gunner :

I downloaded all of those except the power notcher, and several others (including both turret punches), and all of them were no problem to read or to print. (Other than using up quite a bit of paper in total)

I was using xpdf to print them.

What means did you use to download them? If you used ftp, you need to be sure to set it to "binary" mode before downloading, or it will be trying to "fix" end-of-line sequences.

Good Luck, DoN.

According to DoN. Nichols :

[ ... ]

I figured (after reading the other responses) that perhaps I should show the actual size of the downloaded files, and then run "sum" on them (try comparing that on your linux box):

======================================================================

-rw-r--r-- 1 dnichols family 4287255 Feb 14 21:43

12_and_18_Hand_Turret_Press_Manual.pdf

-rw-r--r-- 1 dnichols family 2569096 Feb 14 21:50

12_and_24_Hand_Shear_Manual.pdf

-rw-r--r-- 1 dnichols family 8939662 Feb 14 21:46

18_E_Stylus_Turret_Punch_Press_Manual.pdf

-rw-r--r-- 1 dnichols family 1092147 Feb 14 21:52

24_and_36_Finger_Brake_Manual.pdf

-rw-r--r-- 1 dnichols family 846995 Feb 14 21:51 2_Hand_Notcher_Manual.pdf

-rw-r--r-- 1 dnichols family 493580 Feb 14 21:51 2_Hand_Punch_Manual.pdf

-rw-r--r-- 1 dnichols family 4946544 Feb 14 21:53 36_Hand_Shear_Manual.pdf

-rw-r--r-- 1 dnichols family 4061888 Feb 14 21:47 Art_of_Bending_Part1.pdf

-rw-r--r-- 1 dnichols family 6005730 Feb 14 21:49 Art_of_Bending_Part2.pdf ======================================================================

====================================================================== Fuego:dnichols 0:48:29 > sum *

65431 8374 12_and_18_Hand_Turret_Press_Manual.pdf 37168 5018 12_and_24_Hand_Shear_Manual.pdf 25337 17461 18_E_Stylus_Turret_Punch_Press_Manual.pdf 64503 2134 24_and_36_Finger_Brake_Manual.pdf 32276 1655 2_Hand_Notcher_Manual.pdf 41171 965 2_Hand_Punch_Manual.pdf 49042 9662 36_Hand_Shear_Manual.pdf 42877 7934 Art_of_Bending_Part1.pdf 16221 11730 Art_of_Bending_Part2.pdf ======================================================================

If all else fails, it looks as though they will all fit on a CD-ROM with space to spare.

Good Luck, DoN.

I was able to do two today - that site is a pig to get loaded. Overloaded or under defined.

Martin

Martin Eastburn @ home at Lions' Lair with our computer lionslair at consolidated dot net NRA LOH & Endowment Member NRA Second Amendment Task Force Charter Founder

D> According to Gunner :

Don must have defined the bandwidth for the rest of us :-)

Martin

Martin Eastburn @ home at Lions' Lair with our computer lionslair at consolidated dot net NRA LOH & Endowment Member NRA Second Amendment Task Force Charter Founder

D> According to Gunner :

Those worked fine for me - and thank you for the leads.

There are two 'current' and two 'obsolete' files missing.

2_Hand_Notcher_Manual 6_&_8_Power_Bender_Manual 1_Power_Rod_Parter 48_Power_Shear_Manual

If you 'save as' you will get a 5K file with a .pdf extention but it's really an .htm. If you click on the link, those open as a web page saying the page is missing. Or, just change the extention and you will see the same thing.

Try re-downloading. I snagged all there was, so if you still have trouble, I can e-mail them to you. Then again I'm on dial up so mailing a CD is not out of the question.

-- W§ mostly in m.s -