formatting link
--Winston
Universal joints and other widgets
Dec 15, 2008
10 Replies
A short piece of hydraulic hose works well if it really is a low torque application. Steve
"SteveB" wrote: I need a universal joint that will not be used by anything stronger than a
^^^^^^^^^^^^^^^^ Universal socket drive, either 3/8" or 1/2"
I need a universal joint that will not be used by anything stronger than a person's arm to crank. 3/8" shaft with either Allen nut or threaded. I also need other various connectors and widgets to connect things. Rollers, pulley wheels, etc. Mostly smallish in size. Can someone send me to a site like
formatting link
or something similar?Steve
formatting link
I've often wondered if Mcmaster Carr was the original inspiration for the ACME company where the coyote gets all that neat stuff...
Doug White
Racer supply shops carry those little u-joints for shifter shafts.
You should find everything you want here...
formatting link
Erik
Leo sez "Universal socket drive, either 3/8" or 1/2"
Hey ! Way clever Leo.
Bob Swinney
"SteveB" wrote: I need a universal joint that will not be used by anything stronger than a
^^^^^^^^^^^^^^^^
Been doing it that way for 30+ years at work..cheap, fast...
"SteveB" wrote
formatting link
Best Regards, Keith Marshall snipped-for-privacy@progressivelogic.com
"I'm not grown up enough to be so old!"
Not all mechanical, but these guys do have stuff from time to time:
formatting link
Have done business with these guys in the past:
formatting link
And of course:
formatting link
Stan
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required