Welding or joining cast drums for heater

• welding cast iron radiator

• Well I finished the week off by trying to weld a plug into a old (75 yrs orso )...

• Welding rod for cast iron?

• The gent offering a rod assortment on ebay got me thinking...Ive onlymade...

• Horseshoe joining help

• With one adult ed intro welding class under my belt, I'd like to try...

• Welding castiron

• Hi,-I have stick welded cast iron (DC reverse I think it was) using...

• Cast iron welding questions

• So I have this charity job for the WA state parks dept. A pulley on an old...

• Brazing or welding cast iron

• I need to repair a safety shield from a large "bench" grinder. Theshield is cast...

• Brazing or welding cast iron

• I need to repair a safety shield from a large "bench" grinder. Theshield is cast...

• Welding two Cast Iron Exhaust Manifolds Together

• I have a 1950 Ford Truck and want to cut an exhaust manifold in half and weld it...

• Fine or coarse thread in cast iron?

• My 17" Drill Press has a slope between quill assembly and casting.As someone...

• Welding Cast Iron

• I'm contemplating the option of adding material to the combustionchamber of...

• Does molten copper stick to steel or cast iron

• I wanted to melt copper and cast an ingot. My question is, can I melt it in an...

• Cast Iron Welding

• Has anyone had experience of having cast iron welding done for them.I am in...

• Welding Decorative Cast Iron Post Cap

• I have no problem welding them on, and did it to several today.When I had a...

• Welding cast steel to mild steel plate.

• Is it ok to weld cast steel to mild steel plate? If so, what sort of rodshould I...

• weld castiron brake drums

• any hints on making heater from brake drums, in particular joining together?

• Garage or shop Heater

• Looking for a heater to keep my utility room pipes from freezing, either ...

• welding cast aluminum?

• Situation; Mid 1940's Buffalo drill press cowling tipped over and broke...

• Cast iron welding

• I just wanted to say, with a bit of preheating, 99% Nickel works likea miracle...