Student team hot fires a liquid bi-propellant engine in the desert

Nov 16, 2026 Last reply: 21 hours ago 4 Replies
Jump to replies (4)

When everything works, this is a vertical demonstrator running a liquid bi-propellant system of nitrous oxide with isopropyl alcohol, firing downward off a steel test stand out in open desert. While it burns, the rig captures thrust along with injector and chamber pressures and temperature gradients, which is exactly the dataset you want from a first fire of a completely new system.



Space Enterprise at Berkeley put the article together around an autogenous pressurization scheme with an internal sliding piston instead of a separate high-pressure nitrogen bottle. In my view that is a smart call: dropping a bottle from the pad setup simplifies the plumbing, though it does put moving parts inside the propellant system. The team worked the stand in hard hats and safety gear, and the rig included load cells for measuring the thrust.



The details that stand out to me are the whiteboard walkthrough of static hot-fire testing, given by the team president alongside another member, and the discussion of how low ambient temperatures affect nitrous oxide vapor pressure, which is a real concern for a desert morning fire. The closing telemetry graph of fuel, oxidizer, injector and chamber pressures during ignition is a nice way to end it.



The catch: the test suffered a hard start that produced an ignition overpressure spike exceeding 3,000 kilograms of thrust, and that spike broke the load cells. The good news is that the core tanks and engine structure stayed recoverable despite the failure. How the instrumentation gets protected on the next attempt is the open question I am left with.



Project by Space Enterprise at Berkeley. Watch it on their YouTube channel:

formatting link


Curious about the hardware after the hard start. Did the overpressure spike wreck the whole article, or was anything on the vertical stand reusable for another fire? Breaking the load cells sounds rough enough that I would expect damage elsewhere too.

The sliding piston pressurization is the choice that impresses me here. My take is that it trades a bit of mechanical complexity inside the tank for leaving a high-pressure nitrogen bottle off the pad entirely, and for a student team hauling gear out to a desert site, one less bottle to cart and hook up seems like a very reasonable trade.

Since they already flagged that low ambient temperatures affect nitrous oxide vapor pressure, I would suggest putting a mechanical fuse or sacrificial mount between the engine and the load cells on the next iteration. Something cheap that fails first could have saved the instrumentation from that 3,000 kilogram spike, and it is a lot easier to replace than calibrated cells.

The maker has shown that the core tanks and engine structure stayed recoverable despite the failure, so the main structure came through. The load cells are the loss, since the overpressure broke them. Nothing has been said about the condition of the piston pressurization hardware or the plumbing beyond that, so I would not want to guess.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required