1. Home
  2. Model rockets forum
  3. Estes Patriot Pressure Plot

Estes Patriot Pressure Plot

Some crazy things. Pressure Flow Dynamics of a
modified Estes 1/10 Patriot. 29mm G80 @ 840ft/sec & 5deg AOA.
7.5 lbs drag at this speed & angle.
On Binaries
Reply to
CJC
Loading thread data ...

Further Reading

  • Pressure oiler?

  • I'm sure this question has come up before, so hopefully someone hasthe...

  • regulator pressure creep

  • My regulators, in particular the acetylene regulator, creeps up when I havethe...

  • rectangular pressure vessel

  • I read the postings here regularly and have a fewwelding/fabrication...

  • High Pressure Low Flow

  • I need to be able to pressurize a tank up to 500 psi, but only need 2-3cfm. Is...

  • High pressure welding test

  • Hi,being a newbe welding and trying to learn something, I contacted the...

  • Hotsy Pressure washer questions

  • One of the things I brought home this weekend..was a Mod 530 Hotsypressure...

  • Pressure Gauge on Bottle Jack

  • When fitted a pressure gauge will register the fluid pressure, which may not be...

  • Hydroforming with a pressure washer

  • Do your friends think that your metalworking hobby is a boring old thing fo r...

  • Diesel injection pump pressure test ?

  • I am would like to find out the approximate pressure of my Ford 7.3 IDIF250...

  • Pressure vessels - A basic history since 1870

  • Abbotts & Co. has been building pressure vessels since it began backin 1870.It...

  • acetylene regulator tank pressure needle shaking

  • Hi,I have a few month old Firepower oxy/acetylene outfit. Just today I...

  • 10 CF Acetylene Tank - Full Pressure

  • Just tried out my new small cutting setup and when I got the tank from thelocal...

  • pressure washer pump oil

  • My washer needed some spring PM so I opened the pump(never done this before) and...

  • Forklift weight scale/pressure gauge?

  • I am thinking, that when the forklift holds a weight on the forks, thepressure...

  • pressure washers

  • Can the output pressure of the small 4-6 hp gas pressure washers be turneddown?...

  • (OT)funny

  • http://www.crainium.net/flash/PenguinJoke.swf oh geez, could we please keep...
  • « previous thread

  • L1 Flight Report

  • We launched on Sunday, which here was a hot, hazy, very humid day with the...
  • next thread »

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.