Slightly OT - electricity explained

I have scrounged this from another list - thanks John ;o))

>>>>>>>>>>>>

Dark Suckers

I was digging through some late Nineteenth Century British Scientific Books and found what I believe to be the original theories that Joseph Lucas (King of the Road and Prince of Darkness) based his electrical lighting equipment on and also, I believe, was employed by the Miller Power and Darkness company as well as Wipac - a contraction of "Why pack up now?".

Since we have a few of scientific bent here, I will share the truth on light and darkness: There is no such thing as a light bulb, let alone a "mood" light. Just as there is no such thing as cold, only the absence of heat, there is no such thing as light, only the absence of dark. For years, it has been believed that electric bulbs emit light, but recent information has proved otherwise. Electric bulbs don't emit light; they suck dark. Thus, we call these bulbs Dark Suckers. The Dark Sucker Theory and the existence of dark suckers prove that dark has mass and is heavier than light.

First, the basis of the Dark Sucker Theory is that electric bulbs suck dark. For example, take the Dark Sucker in the room you are in. There is much less dark right next to it than there is elsewhere. The larger the Dark Sucker, the greater its capacity to suck dark. Dark Suckers in the parking lot have a much greater capacity to suck dark than the ones in this room.

So with all things, Dark Suckers don't last forever. Once they are full of dark, they can no longer suck. This is proven by the dark spot on a full Dark Sucker. The dark which has been absorbed is then transmitted by pylons along to power plants where the machinery uses fossil fuel to destroy it.

A candle is a primitive Dark Sucker. A new candle has a white wick. You can see that after the first use, the wick turns black, representing all the dark that has been sucked into it. If you put a pencil next to the wick of an operating candle, it will turn black. This is because it got in the way of the dark flowing into the candle.

One of the disadvantages of these primitive Dark Suckers is their limited range. There are also portable Dark Suckers. In these, the bulbs can't handle all the dark by themselves and must be aided by a Dark Storage Unit. When the Dark Storage Unit is full, it must be either emptied or replaced before the portable Dark Sucker can operate again. Dark has mass. When dark goes into a Dark Sucker, friction from the mass generates heat. Thus, it is not wise to touch an operating Dark Sucker.

Candles present a special problem as the mass must travel into a solid wick instead of through clear glass. This generates a great amount of heat and therefore it's not wise to touch an operating candle. This is easily proven for lightbulbs too. When you compress a gas, it gets hot, right? So the light bulb gets hot because of all the dark being squished into the wires. Also, dark is heavier than light. If you were to swim just below the surface of the lake, you would see a lot of light. If you were to slowly swim deeper and deeper, you would notice it getting darker and darker. When you get really deep, you would be in total darkness. This is because the heavier dark sinks to the bottom of the lake and the lighter light floats at the top. The is why it is called light.

Dark Suckers are only able to suck dark in a straight line. Dark, because of its mass, will not penetrate solid, opaque objects as it is being sucked by a Dark Sucker. When a Dark Sucker is operating, you will notice that dark that is behind a solid, opaque object does not flow through the object or around it to the Dark Sucker. Some of the dark will accumulate on the side of the object away from the Dark Sucker as the Dark Sucker attempts to pull it through the object. These residual patches of dark are often referred to as `shadows.'

Some surfaces are able to function as secondary Dark Suckers by sucking the dark from behind solid objects at an angle and then rerouting it to the primary Dark Sucker. These surfaces have a property we refer to as `reflective.'

Finally, there is evidence that dark is faster than light. If you were to stand in a lit room in front of a closed, dark cupboard and slowly open the cupboard door, you would see the interior slowly get lighter. But since dark moves faster than light, you would not be able to see the dark leave the cupboard.

So, next time you see an electric bulb, remember that it is not a light emitter but a Dark Sucker.

>>>>>>>>>>>>>>

- and it all makes perfect sense.

If anyone has a copy of the one about wires being filled with smoke and electrickery, please can I have a copy?

Regards,

Kim Siddorn

Reply to
J K Siddorn
Loading thread data ...

Smokeless fuel

Electrical generators are, in fact, smoke generators. In dynamos, you can actually see the blue sparks at the commutator producing the smoke. It is stored in batteries and transmitted from one part of the circuit to another by electron flow in the wires pumping the visible spectral manifestation known as "smoke". This flow causes heat to be generated and it must be steadily emitted from the system or build ups can occur in components. If allowed to continue uncorrected, things will get worse until the smoke bursts out of the wires or components and escapes into the atmosphere.

We know Smoke is the thing that makes electrical circuits work because every time one lets the smoke out of the electrical system, it stops working. This can be verified repeatedly through empirical testing. Sometimes, if most of the smoke can be kept in the container and allowed to condense back into the wiring, the circuit will continue to function although its efficiency may be impaired.

When, for example, the smoke escapes from an electrical component (i.e., say, a Lucas voltage regulator), it will be observed that the component stops working. The function of the wiring harness is to carry the smoke from one device to another. When the wires "spring a leak" and let all the smoke out of the system, nothing works afterwards. Starter motors were frowned upon in British Automobiles for some time, mainly because they consume large quantities of smoke and require very large wires.

It has been noted that Lucas components are possibly more prone to electrical leakage than Bosch or generic Japanese electrics. Experts point out that this is because Lucas is British and all things British leak. British engines leak oil, shock absorbers, hydraulic forks and disk brakes leak fluid, British tyres leak air and all British government departments leak. It follows, that British electrical components leak smoke. Studies show, however, that Japanese electrical circuits are much less forgiving than British systems and the loss of even a little smoke usually means complete failure.

German systems are as sturdy in constructions as British and can withstand heat quite well. Italian components are generally too complicated and flimsy and often the smoke can escape unnoticed until the system inexplicably stops working. Russian smoke is very strong and can only be contained in thick wires and big boxes.

Regards,

Kim Siddorn

Reply to
J K Siddorn

Thanks Kim,

that was very interesting, as I have an intrest in old generators, switching and electrical generally.

My locality has several large houses (estates) and many of the "outside town" estates generated their own lighting power. Some were water driven others by engine. Occasionally I come across remnants in out houses, mainly wiring and/or switch boards, mainly installed by Youngs. Sevenoaks has always had lots of very big houses, and a mile and a quarter trip in the local taxi will cost you about £4-80.

Hopefully oneday, I will have enough bits to make up a switchboard and install a "period" standby lighting system. At least I have lots of origonal wodden trunking (capping) but no old generator yet.

A project with lots of potential!

Simon Taylor

Reply to
Simon Taylor

I remember both of these from my days at EMI Radar Div'n. The elemental particle of dark is of course the darkon and the smoke theory actually has a practical application! When faced with a card full of electronic components which had somewhere sprung a leak, one could sometimes 'smell out' the device from which the smoke had escaped. The sight of an old hand sniffing a failed card was usually greeted with derision by newcomers on the lookout for wind-ups, but it did sometimes work - honest.

Reply to
Nick Highfield

I have spent many a tense hour looking for the 'expensive burning smell' at work.

-- Patrick M Livingstone Leichhardt NSW

formatting link

Reply to
Patrick M Livingstone

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.