FA (UK only) complete radio control electric model helicopter with radio gear and accessories

Hi,
Hi, it's the last 24 hours of the auction for my Eco 8 radio control model helicopter. To see the pictures and/or make a bid then checkout
the Ebay item number 3139726210 or search on "Eco 8" at www.ebay.co.uk
The item text is as follows :
"Eco 8 radio controlled electric model helicopter. Assembled, complete and ready to go (will need to remove tailboom and canopy for shipping - 10 minute job to refit). This includes absolutely everything you need to start from scratch in RC electric helicopters : nothing else is required in order to fly this electric heli, all radio gear (even the TX) is included.
See my other auction for a comprehensive set of upgrades and spare parts, including brushless motor / controller setup with a pair of 10 cell flight packs for ultimate performance.
Included in sale :
Eco 8 Electric helicopter including original Ikarus assembly drawings and instructions Futaba FF6 computer TX (boxed complete with instructions, NiCad, charger and Xtal) Webra 6 channel micro RX with Xtal GWS PG-03 Gyro (complete with original box and instructions) 3 off BX250 MG BB metal gear ball-bearing servos (collective and pitch control) 1 off HS80 MG servo (tail rotor control) Ikarus Helicontrol 610 (6 to 10 cell) Speed controller with BEC 600 sized motor (9.6V) 1700 mAh Sanyo NiCad battery pack Hitec 325 charger (delta peak detect, 4.5 A max charge current) / discharger / capacity meter. Boxed with manual. Mechanical CCP mixer (supplied but not fitted) Normal (non-autorotation) main gear (supplied but not fitted)
Includes following upgrades :
QuickUK Electronic CCP mixer (supplied and fitted) Autorotation hub (supplied and fitted) Horizontal Stabiliser (supplied but not fitted)"
Buyer (UK only) pays postage. Cheques/drafts drawn on UK banks only accepted. PAYPAL NOT ACCEPTED."
Thanks,
Mike
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload

Polytechforum.com is a website by engineers for engineers. It is not affiliated with any of manufacturers or vendors discussed here. All logos and trade names are the property of their respective owners.