Dualsaw - any comments?

Saw an infomercial on it, look neat but I see only a 1.5" D.O.C. max. that would really limit it's usefullness. Thank You, Randy

Remove 333 from email address to reply.

3"dia not to shabby. Spose if some guards removed, maybe 3 1/4?-3 1/2? No we would not do that!

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D ______ /_____/\ Best Regards, /____ \\ \ Gil Pawl /_____\ \\ / HOLDZEM=A9=AE /_____/ \/ / / /_____/ / \//\ West Chicago, IL \_____\//\ / / USA \_____/ / /\ / \_____/ \\ \ \_____\ \\ \_____\/ =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D Special alt.machines.cnc offer: Send me your mailing address by e-mail & I'll send you some Holdzem's for the cost of USPS, around $3-4 in US.

Not even 1.5" from the web site.

What are the product Specs for Omni Dual Saw?

• Power: 900 w/ 3.9A * Current (no load): 3.4 A * Frequency: 60 Hz * Blade Size: 5 In. * No Load Speed: 6000 RPM * Depth of Cut (Max.) 1-1/8 In. * Extension Cord: 8 feet

On the TV show they were cutting what looked like 2" PVC pipe, they had to rotate it to get all the way through.

Thank You, Randy

Remove 333 from email address to reply.

5/2 = 2.5 - take some more out for a washer/nut...

The smaller blade has lower torque - that is the metal won't force the blade backwards as hard as an 8" blade.

2" cut for metal is fine. And for most construction metal work. Showed how to cut larger pipe if needed. How a bout a 6" conduit ?

Mart> >>> >>>> Looks kinda cool?

Any website that starts off with audio, I quit looking at.

Wes