1. Home
  2. ⏚ Electrical Engineering
  3. flush chrome sockets problem

flush chrome sockets problem

sorry if this is the wrong news group.
can i fit flush wall sockets into a dry line wall?
If so what boxes do i use?
thanks in advance
Reply to
nbanana
Loading thread data ...
Dry lining (plasterboard) boxes, although it depends on what the clearance is behind the board and if there's a solid wall there or not.
BTW, the shiney chrome sockets are a swine to keep clean, every fingerprint shows up. The brushed steel ones don't have this problem.
Reply to
Andrew Gabriel
flat plate accessories require a 35mm deep box raised plate need 25mm boxes, but most quality drylining boxes are 35mm anyway
formatting link
Hope this helps.
Reply to
St Dom

Further Reading

  • flush or low profile pivot fastener

  • I need a flush or very low-profile fastener for the pivot points of levers in a...

  • Mains wiring question: flush vs. surface load panel

  • Installing a charging station in a garage for the new car owner. The charger is...

  • EMCO MAXIMAT 10

  • in a pile of stuff from an estate of a tool collector, I picked up a small arbor...

  • Location of phone wall sockets

  • I am moving the telephone wall socket in my study because I'm often checking...

  • Weld bead on flush faces of tubing joint

  • I'm attempting to put a weld bead on a simple tubing weldment...

  • Flush toilet and the security light goes out.

  • I was having a problem with voltage drop after putting in a new heat and...

  • Canadian wall sockets -help requested

  • Please, do NOT rely on it though. I've seen quite a few sockets wiredwrong....

  • Problem w/ chrome

  • I tried using bleach to strip the chrome plating off of a sprue, but theresults...

  • Bending chrome molly tube?

  • Hi All, I have tried to bend a 1 5/8 " x .058 " wall chrome-molly tube, but...

  • welding on chrome rims

  • I plan on building my own beadlock wheels for a jeep. Here is a link to what...

  • What's wrong with this assembly?

  • Hello people!I downloaded this caster assembly from the Sunnex website, however...

  • Bridgeport has Chrome Ways?

  • Hi,I've finally found a really sharp Bridgeport Mill in Los Angeles (itseems...

  • I honestly feel sorry for this guy...

  • Seen recently on...

  • Canadian Wiring & Accessories

  • Hi All, interesting reading. I am a new resder to this group so be gentle.... I...
  • « previous thread

  • magnetic field

  • Hi, I would like to know what is a magnetic field. I mean what is it composed...
  • next thread »

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.