6 discussions on PolyTech Forum about the Miller 330ST: what owners asked, what went wrong, and what fixed it.
I have got a nice stainless steel shaft from scrap for $2. I want to cut a short section of 1"-8 thread at one end. The obvious answer is to take it to someone with a lathe and do it right. They charge $45 for the job. A second option is to...
I used to have a Syncrowave 250 since some time ago. Manual: also brought home a Miller Aircrafter 330ST welder that I boughtfrom the military (Rock Island Arsenal). Manual: is essentially two questions. 1. Syncrowave vs....
... for I bought three more welding machines for resale, despitehaving sworn off doing ebay.So if anyone wants a Miller 330ST AirCrafter single phase TIG welder,Hobart MegaFlex 450 RVS stick/MIG welder with wirefeed, or a LincolnDC-1500...
I spotted this on Craigslist within driving distance from me. Comes withthe torch, pedal, self dimming mask, etc, but no gas cylinder. Listed at$1500 which probably isn't a real bargain.In doing a little scanning on the net I've seen some...
I sold the Miller Aircrafter 330ST AC/DC Tig welder yesterday. Twoguys showed up, and older man and a younger one. Everything went wellans in the end I asked if they were related. Turns out that they werefather and son and this welder was a...
I sold the Miller Aircrafter 330ST AC/DC Tig welder yesterday. Twoguys showed up, and older man and a younger one. Everything went wellans in the end I asked if they were related. Turns out that they werefather and son and this welder was a...