I've aquired a small 400 size erickson speed indexer, it appears to have different adjustments inside to set the arc per index, anyone have a manual they would be willing to copy for me for a small fee?? There is one on EBAY for $50.00, I know it doesn't take that much copy paper !! Thanks in advance, Jon
Hey Jon, I don't have a manual, but inside the back of the indexer on the left hand side there is a plate going CCW from about 12:00 to 9:00 with some tapped holes in it. Each tapped hole should have a number stamped next to it, the number indicates the number indexes for one revolution. One of the holes should have a SHCS in it, if not find one that fits. If I remember right the hole at 12:00 has a 24 next to it, if you put the SHCS in this hole each index will be 1/24 of a revolution (15degrees), the hole at 9:00 should be a
4 which would be 1/4 of a rev. (90 degrees). PaulPolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.