Can anyone recommend a source for strange size screws?
This started as a rifle scope mounting project, but has escalated into a search for the source of this type of specialty screw. We have a need for #6-48 screws (found only in large kits by Forster Products, in Brownells' site), and #8-36 Fillister (found in McMaster-Carr, in SHCS, but not Fillister).
Where are these types of screws available in a larger selection of types and quantities???
Thanks for your help,
Spencer
Small Parts!
--Try: sbbolts.com
One of the best ways to approach this problem is to simply purchase a quality die for the thread type you want. Then manfufacture your own fasteners to fit. As long as it's slotted head, you can easily make them on nearly any lathe.
Jim
================================================== please reply to: JRR(zero) at yktvmv (dot) vnet (dot) ibm (dot) com ==================================================
Try this company; not sure if they have what you want, but they are a fastener specialist.
Tensile and yield strengths will be different....
;-)
Regards,
Robin
Call Brownells and ask them about either buying from them in larger quantities or ask them who their suppliers are. Those folks are very helpful and I would not be surprised at all if they referred you to a supplier for a larger quantity purchase.
I consider my Brownells catalog to be the first place to look for an oddball screw, tap, or die. Especially for small quantities or one job use tooling.
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.