tweezers?

"David R.Birch" wrote

When I did a lot of ornamental metal, I did a lot of work with fresh square tubing with "fish oil" on it. Black hands and fingernails. Until I found Orange hand cleaner, I used Dawn. Wrong thing to do! It took so much oil out of my skin that it cracked and bled. ARGGGGGHHHHHH! A Tim the Too Man Taylor thing. Tough guy.

Well, this woos, former tough guy now uses orange hand cleaner with pumice AND lotion afterward. No sense being an idiot.

Steve

visit my blog at

A fool shows his annoyance at once, but a prudent man overlooks an insult.

TY. I must have some. (one for the shop, one for the shave kit, one for each bathroom in the house, one for each first aid kit, and a couple for when I can't find one of the others.)

Steve

visit my blog at

A fool shows his annoyance at once, but a prudent man overlooks an insult.

=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0-- John Ruskin

=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0-- John Ruskin

Maybe I'll have to get a real Swiss army knife. I've never been impressed with the tweezers from the army knives I've had (probably knock-offs) -- just too flimsy. They're only good for holding bugs if you want to examine them closely. :)

That price is insane.

"Karl Townsend" on Mon, 26 Apr 2010

I was going to wait and see.

I never could find a pair of tweezers which would actually get the little fine slivers. Was bitching about it at work and one of the guys say "Use your calipers- they've got a flat surface." "Well, duh!" says I.

If it gets that big, I will get the medical kit out. Otherwise, I keep a roll of the micropore paper tape. Tape it shut and back to work.

- pyotr filipivich We will drink no whiskey before its nine. It's eight fifty eight. Close enough!

On Tue, 27 Apr 2010 06:41:05 -0700, the infamous Winston scrawled the following:

I MUCH prefer his more subtle wit in his later works, such as the "Die Hard" series, "The Fifth Element", "The Last Boy Scout", and "Last Man Standing", and her wit in the movie where she played a hitwoman (can't find the title, damnit.)

-- Losing faith in humanity, one person at a time.

On Tue, 27 Apr 2010 21:08:55 -0500, the infamous "David R.Birch" scrawled the following:

To lots of metalworkers, electricity is new and leather belting is modern.

-- Losing faith in humanity, one person at a time.

I use a brand-new X-acto blade, the one that comes to a sharp point. I can excavate a tiny bit around the sliver to expose it, then use the blade side to drag the sliver out. Most slivers from machining have very rough surfaces, so the brand-new blade easily catches in the roughness and pulls the sliver out. no way can you get fine enough tweezer points to grab a tiny sliver as well as this.

Jon

It is. But it was the first I found with an image of the Tweezers in question.

Those prices are a bit more reasonable -- adjusting what I ordered them for at work for inflation.

Thanks for finding that one.

Enjoy, DoN.

The price may seem to be insane, but consider that no others are made of "100% high-tech allow".